From 4f02716575cf804b3888937ff132a7ef238e4f4c Mon Sep 17 00:00:00 2001
From: Joerg Lehmann <joerg.lehmann@nbit.ch>
Date: Fri, 25 May 2018 17:35:11 +0200
Subject: [PATCH] changed wlan access

---
 install-files/etc/hostapd/hostapd.conf | 15 ++++++++++++---
 install-files/etc/ppp/peers/rnet       |  4 ++--
 web-root/index.tpl                     |  2 +-
 3 files changed, 15 insertions(+), 6 deletions(-)

diff --git a/install-files/etc/hostapd/hostapd.conf b/install-files/etc/hostapd/hostapd.conf
index ae8c544..98d0a17 100644
--- a/install-files/etc/hostapd/hostapd.conf
+++ b/install-files/etc/hostapd/hostapd.conf
@@ -11,7 +11,7 @@ ssid=beielipi
 # First up, the SSID or Network name. This is what other devices will see when they try to connect.
 hw_mode=g
 # I'm setting this to Wireless G mode. A, B, and G are available here.
-channel=1
+channel=7
 # This is setting the channel that the WiFi is on, valid channels are from 1-11, or 1-14 depending on location.
 
 # Wifi Security Settings
@@ -20,6 +20,10 @@ channel=1
 # The line above sets the wpa passphrase to "raspiwlan", this is obtained via the wpa_passphrase command.
 # However, you can also set a passphrase like the line below.
 #wpa_passphrase=raspiwlan
+wpa=2
+wpa_key_mgmt=WPA-PSK
+wpa_pairwise=CCMP
+wpa_passphrase=beielipi
 
 #wpa_key_mgmt=WPA-PSK
 #wpa_pairwise=CCMP
@@ -30,5 +34,10 @@ channel=1
 
 # Other settings
 beacon_int=100 # This sets how often the WiFi will send a beacon out.
-auth_algs=3
-wmm_enabled=1
+auth_algs=1
+wmm_enabled=0
+
+# see https://raspberrypi.stackexchange.com/questions/11713/rtl8188cus-extremely-slow
+#wme_enabled=1
+#ieee80211n=1
+#ht_capab=[HT40+][SHORT-GI-40][DSSS_CCK-40]
diff --git a/install-files/etc/ppp/peers/rnet b/install-files/etc/ppp/peers/rnet
index 3699477..a99224c 100644
--- a/install-files/etc/ppp/peers/rnet
+++ b/install-files/etc/ppp/peers/rnet
@@ -1,6 +1,6 @@
 #imis/internet is the apn for idea connection
-#connect "/usr/sbin/chat -v -f /etc/chatscripts/gprs -T gprs.swisscom.ch"
-connect "/usr/sbin/chat -v -f /etc/chatscripts/gprs -T internet"
+connect "/usr/sbin/chat -v -f /etc/chatscripts/gprs -T gprs.swisscom.ch"
+#connect "/usr/sbin/chat -v -f /etc/chatscripts/gprs -T internet"
  
 # For Raspberry Pi3 use /dev/ttyS0 as the communication port:
 /dev/ttyUSB0
diff --git a/web-root/index.tpl b/web-root/index.tpl
index beef990..6432c1e 100644
--- a/web-root/index.tpl
+++ b/web-root/index.tpl
@@ -24,7 +24,7 @@
         <div class="container-fluid">
           <div class="text-center">
             <h3>BeieliPi Zugang via WLAN-Hotspot</h3>
-            <p>Zugang zu dieser Seite: Verbinden (WLAN) mit SSID <strong>beielipi</strong> (kein Passwort), dann Aufruf von <strong>http://beielipi.local</strong></p>
+            <p>Zugang zu dieser Seite: Verbinden (WLAN) mit SSID <strong>beielipi</strong> (Passwort: beielipi), dann Aufruf von <strong>http://beielipi.local</strong></p>
             <p>Hotspot aktivieren per SMS an {{ beielipi_mobile_number }}, Text: "hotspot on" (zum Deaktivieren: "hotspot off")</p>
           </div>
           <div id="navbar" class="navbar-collapse collapse">