Beta Release

2017-11-09 13:46:58 +01:00
parent b379570033
commit e3e1387117
62 changed files with 32013 additions and 26 deletions
@@ -0,0 +1,34 @@
+# First we configure the interface we'll be listening on
+interface=wlan0
+# The interface to listen on
+driver=nl80211
+# The driver that is being used by the WiFi adapter, this could be different for everyone
+ctrl_interface=/var/run/hostapd
+ctrl_interface_group=0
+# These 2 are just parameters so that the hostap daemon runs.
+# Now onto the important WiFi configuration
+ssid=beielipi
+# First up, the SSID or Network name. This is what other devices will see when they try to connect.
+hw_mode=g
+# I'm setting this to Wireless G mode. A, B, and G are available here.
+channel=1
+# This is setting the channel that the WiFi is on, valid channels are from 1-11, or 1-14 depending on location.
+
+# Wifi Security Settings
+#wpa=2 # This sets the security settings to WPA2
+#wpa_psk=928519398acf811e96f5dcac68a11d6aa876140599be3dd49612e760a2aaac0e
+# The line above sets the wpa passphrase to "raspiwlan", this is obtained via the wpa_passphrase command.
+# However, you can also set a passphrase like the line below.
+#wpa_passphrase=raspiwlan
+
+#wpa_key_mgmt=WPA-PSK
+#wpa_pairwise=CCMP
+#rsn_pairwise=CCMP
+# I've set these to WPA-PSK to indicate that we are using a Pre-Shared Key with CCMP encryption.
+# Otherwise, hostapd also has a built in RADIUS server that we can use for authentcation
+# But I'll leave that to another post.
+
+# Other settings
+beacon_int=100 # This sets how often the WiFi will send a beacon out.
+auth_algs=3
+wmm_enabled=1