44 lines
1.6 KiB
Plaintext
44 lines
1.6 KiB
Plaintext
# First we configure the interface we'll be listening on
|
|
interface=wlan0
|
|
# The interface to listen on
|
|
driver=nl80211
|
|
# The driver that is being used by the WiFi adapter, this could be different for everyone
|
|
ctrl_interface=/var/run/hostapd
|
|
ctrl_interface_group=0
|
|
# These 2 are just parameters so that the hostap daemon runs.
|
|
# Now onto the important WiFi configuration
|
|
ssid=beielipi
|
|
# First up, the SSID or Network name. This is what other devices will see when they try to connect.
|
|
hw_mode=g
|
|
# I'm setting this to Wireless G mode. A, B, and G are available here.
|
|
channel=7
|
|
# This is setting the channel that the WiFi is on, valid channels are from 1-11, or 1-14 depending on location.
|
|
|
|
# Wifi Security Settings
|
|
#wpa=2 # This sets the security settings to WPA2
|
|
#wpa_psk=928519398acf811e96f5dcac68a11d6aa876140599be3dd49612e760a2aaac0e
|
|
# The line above sets the wpa passphrase to "raspiwlan", this is obtained via the wpa_passphrase command.
|
|
# However, you can also set a passphrase like the line below.
|
|
#wpa_passphrase=raspiwlan
|
|
wpa=2
|
|
wpa_key_mgmt=WPA-PSK
|
|
wpa_pairwise=CCMP
|
|
wpa_passphrase=beielipi
|
|
|
|
#wpa_key_mgmt=WPA-PSK
|
|
#wpa_pairwise=CCMP
|
|
#rsn_pairwise=CCMP
|
|
# I've set these to WPA-PSK to indicate that we are using a Pre-Shared Key with CCMP encryption.
|
|
# Otherwise, hostapd also has a built in RADIUS server that we can use for authentcation
|
|
# But I'll leave that to another post.
|
|
|
|
# Other settings
|
|
beacon_int=100 # This sets how often the WiFi will send a beacon out.
|
|
auth_algs=1
|
|
wmm_enabled=0
|
|
|
|
# see https://raspberrypi.stackexchange.com/questions/11713/rtl8188cus-extremely-slow
|
|
#wme_enabled=1
|
|
#ieee80211n=1
|
|
#ht_capab=[HT40+][SHORT-GI-40][DSSS_CCK-40]
|