reduce timeout again to 300sec, but sleep 10sec after timeout

README.md

@@ -3,3 +3,52 @@
 Code fuer den LoraWAN Node
 
 Autor: Joerg Lehmann, nbit Informatik GmbH
+
+| Parameter         | Value                       |
+| ----------------- | --------------------------- |
+| Board             | MCCI Catena 4610            |
+| LoraWAN Subband   | "Default, works everywhere" |
+| Serial interface  | Generic Serial              | 
+| LoraWAN Network   | Swisscom                    |
+| System Clock      | 24 MHz                      |
+| LoraWAN Region    | Europe 868 MHz              |
+| Optimize          | Smallest (-Os default)      |
+
+Das sind die verwendeten Libraries [1]:
+
+| URL | Commit | Commit Date |
+| --- | -----  | ----------- |
+| https://github.com/mcci-catena/Adafruit_BME280_Library.git  | 3dafbe1 | Wed, 13 Dec 2017 13:56:30 -0500  |
+| https://github.com/mcci-catena/Adafruit_Sensor.git  | f2af6f4 | Tue, 1 Sep 2015 15:57:59 +0200  |
+| https://github.com/mcci-catena/arduino-lmic.git  | 6fe04ec | Tue, 12 May 2020 09:16:47 -0400  |
+| https://github.com/mcci-catena/arduino-lorawan.git  | 4bc0d48 | Sat, 9 May 2020 12:38:28 -0400  |
+| https://github.com/mcci-catena/Catena-Arduino-Platform.git  | 92019ca | Tue, 12 May 2020 01:34:08 -0400  |
+| https://github.com/mcci-catena/Catena-mcciadk.git  | a428006 | Sat, 21 Dec 2019 20:45:26 -0500  |
+| https://github.com/mcci-catena/MCCI_FRAM_I2C.git  | f0a5ea5 | Sat, 21 Dec 2019 16:17:01 -0500  |
+| https://github.com/tatobari/Q2-HX711-Arduino-Library.git  | ccda8d8 | Wed, 13 Mar 2019 12:41:44 -0300  |
+| https://github.com/sparkfun/SparkFun_Qwiic_Scale_NAU7802_Arduino_Library.git  | 688f255 | Fri, 3 Jan 2020 12:35:22 -0700  |
+| https://github.com/mcci-catena/OneWire.git  | d814a7b | Thu, 26 Apr 2018 03:45:27 +0800  |
+| https://github.com/mcci-catena/SHT1x.git  | be7042c | Tue, 20 Sep 2011 13:56:23 +1000  |
+
+
+Patch arduino-lmic, so initial SF10 is used initially:
+
+`
+[joerg@cinnamon src]$ git diff
+diff --git a/src/lmic/lmic_bandplan_eu868.h b/src/lmic/lmic_bandplan_eu868.h
+index efff7d5..74efb37 100644
+--- a/src/lmic/lmic_bandplan_eu868.h
++++ b/src/lmic/lmic_bandplan_eu868.h
+@@ -61,7 +61,7 @@ LMICeu868_isValidBeacon1(const uint8_t *d) {
+ #undef LMICbandplan_isFSK
+ #define LMICbandplan_isFSK()    (/* RX datarate */LMIC.dndr == EU868_DR_FSK)
+ 
+-#define LMICbandplan_getInitialDrJoin() (EU868_DR_SF7)
++#define LMICbandplan_getInitialDrJoin() (EU868_DR_SF10)
+ 
+ void LMICeu868_setBcnRxParams(void);
+ #define LMICbandplan_setBcnRxParams()   LMICeu868_setBcnRxParams()
+`
+
+`[1]:
+[joerg@cinnamon libraries]$ for i in Adafruit_BME280_Library Adafruit_Sensor arduino-lmic arduino-lorawan Catena-Arduino-Platform Catena-mcciadk MCCI_FRAM_I2C Q2-HX711-Arduino-Library SparkFun_Qwiic_Scale_NAU7802_Arduino_Library OneWire SHT1x ; do cd $i; echo "| $(git remote -v |grep fetch |awk '{print $2}' |tr '\n' ' ') | $(git log --pretty=format:'%h | %cD ' -n 1) |" ; cd ..; done`

helper.h

@@ -0,0 +1,78 @@
+#ifndef _HELPER_H_
+#define _HELPER_H
+
+#pragma once
+
+#ifndef _CATENA_H_
+#include <Catena.h>
+#endif
+
+using namespace McciCatena;
+
+// the primary object
+Catena gCatena;
+
+
+//Following functions are based on "https://github.com/dndubins/QuickStats", by David Dubins
+
+void bubbleSort(long A[], int len) {
+  unsigned long newn;
+  unsigned long n = len;
+  long temp = 0;
+  do {
+    newn = 1;
+    for (int p = 1; p < len; p++) {
+      if (A[p - 1] > A[p]) {
+        temp = A[p];         //swap places in array
+        A[p] = A[p - 1];
+        A[p - 1] = temp;
+        newn = p;
+      } //end if
+    } //end for
+    n = newn;
+  } while (n > 1);
+}
+
+long median(long samples[], int m) //calculate the median
+{
+  //First bubble sort the values: https://en.wikipedia.org/wiki/Bubble_sort
+  long sorted[m];   // Define and initialize sorted array.
+  long temp = 0;    // Temporary float for swapping elements
+
+  for (int i = 0; i < m; i++) {
+    sorted[i] = samples[i];
+  }
+  bubbleSort(sorted, m); // Sort the values
+
+  if (bitRead(m, 0) == 1) { //If the last bit of a number is 1, it's odd. This is equivalent to "TRUE". Also use if m%2!=0.
+    return sorted[m / 2]; //If the number of data points is odd, return middle number.
+  } else {
+    return (sorted[(m / 2) - 1] + sorted[m / 2]) / 2; //If the number of data points is even, return avg of the middle two numbers.
+  }
+}
+
+// Joergs STDDEV
+float stddev(long samples[], int m) //calculate the stdandard deviation
+{
+  float sum_x;
+  float sum_x2;
+  float mean;
+
+  float stdev;
+  sum_x = 0;
+  sum_x2 = 0;
+
+  for (int i = 0; i < m; i++) {
+    sum_x = sum_x + samples[i];
+  }
+  mean = sum_x / m;
+
+  for (int i = 0; i < m; i++) {
+    sum_x2 = sum_x2 + ((samples[i] - mean) * (samples[i] - mean));
+  }
+
+  stdev = sqrt(sum_x2 / m);
+
+  return stdev;
+}
+#endif

mini-beieli-node.ino

@@ -8,6 +8,9 @@
 
 */
 
+// HX711: 0 => compile for hx711, 1 => compile for NAU7802
+#define HX711 0
+
 #include <Catena.h>
 
 #include <Catena_Led.h>
@@ -25,9 +28,18 @@
 #include <cmath>
 #include <type_traits>
 
-#include <HX711.h>
 #include "mini_beieli_node.h"
 
+#if (HX711)
+#include "mini_beieli_node_hx711.h"
+#else
+#include "mini_beieli_node_nau7802.h"
+#endif
+
+#ifndef _HELPER_H_
+#include "helper.h"
+#endif
+
 using namespace McciCatena;
 
 // forwards
@@ -104,10 +116,6 @@ uint32_t gRebootMs;
 // generic timer
 long t_cur;
 
-// the primary object
-Catena gCatena;
-
-//
 // the LoRaWAN backhaul.  Note that we use the
 // Catena version so it can provide hardware-specific
 // information to the base class.
@@ -131,30 +139,27 @@ SPIClass gSPI2(
 Catena_Mx25v8035f gFlash;
 bool fFlash;
 
-// Scales
-HX711 LoadCell;
-
 //  USB power
 bool fUsbPower;
 
 // have we printed the sleep info?
-bool g_fPrintedSleeping = false;
-
 //  the job that's used to synchronize us with the LMIC code
 static osjob_t iterationJob;
 static osjob_t sendJob;
 
+// the cycle time to use
+unsigned gTxCycle;
+// remaining before we reset to default
+unsigned gTxCycleCount;
+
 void setup(void)
 {
   gCatena.begin();
 
-  // Use D10 to regulate power
-  pinMode(D10, OUTPUT);
-
   setup_platform();
+  SetupScales(config_data.debug_level);
   ClearLoraData();
   setup_bme280();
-  //setup_scales();
 
   setup_flash();
   setup_uplink();
@@ -163,7 +168,7 @@ void setup(void)
 void setup_platform(void)
 {
   if (config_data.debug_level > 0) {
-    gCatena.SafePrintf("%010d - setup_platform\n", millis());
+    gCatena.SafePrintf("Setup_platform\n");
   }
 
   /* add our application-specific commands */
@@ -174,12 +179,12 @@ void setup_platform(void)
 
   // read config_data from fram...
   if (config_data.debug_level > 0) {
-    gCatena.SafePrintf("%010d - Reading Calibration Config from FRAM...\n", millis());
+    gCatena.SafePrintf("Reading Calibration Config from FRAM...\n");
   }
-  gCatena.getFram()->getField(cFramStorage::kBme680Cal, (uint8_t *)&config_data, sizeof(config_data));
+  gCatena.getFram()->getField(cFramStorage::kAppConf, (uint8_t *)&config_data, sizeof(config_data));
 
   if (config_data.debug_level > 0) {
-    gCatena.SafePrintf("%010d - setup_platform, this is the configuration\n", millis());
+    gCatena.SafePrintf("Setup_platform, this is the configuration\n");
     gCatena.SafePrintf("cal_w1_0: %d\n", config_data.cal_w1_0);
     gCatena.SafePrintf("cal_w2_0: %d\n", config_data.cal_w2_0);
     gCatena.SafePrintf("cal_w1_factor: %d.%03d\n", (int)config_data.cal_w1_factor, (int)abs(config_data.cal_w1_factor * 1000) % 1000);
@@ -246,6 +251,7 @@ void setup_platform(void)
   }
 
   gLoRaWAN.SetReceiveBufferBufferCb(receiveMessage);
+  setTxCycleTime(CATCFG_T_CYCLE_INITIAL, CATCFG_INTERVAL_COUNT_INITIAL);
   gCatena.registerObject(&gLoRaWAN);
 
   /* find the platform */
@@ -278,7 +284,7 @@ void setup_platform(void)
 void setup_bme280(void)
 {
   if (config_data.debug_level > 0) {
-    gCatena.SafePrintf("%010d - setup_bme280\n", millis());
+    gCatena.SafePrintf("Setup_bme280\n");
   }
 
   if (gBME280.begin(BME280_ADDRESS, Adafruit_BME280::OPERATING_MODE::Sleep)) {
@@ -293,30 +299,17 @@ void setup_bme280(void)
 bool setup_scales(void)
 {
   if (config_data.debug_level > 0) {
-    gCatena.SafePrintf("%010d - setup_scales\n", millis());
+    gCatena.SafePrintf("Setup_scales\n");
   }
 
   bool res;
   res = true;
 
   // Enable Power
-  digitalWrite(D10, HIGH);
-
-  // Initialize library with data output pin, clock input pin and gain factor.
-  // Channel selection is made by passing the appropriate gain:
-  // - With a gain factor of 64 or 128, channel A is selected
-  // - With a gain factor of 32, channel B is selected
-  // By omitting the gain factor parameter, the library
-  // default "128" (Channel A) is used here.
-  LoadCell.begin(A1, A0, 32);
-
-  if (!(LoadCell.wait_ready_timeout(2000))) {
-    gCatena.SafePrintf("%010d - Scale not ready after Init.\n");
-    res = false;
-  }
+  PowerupScale();
 
   if (config_data.debug_level > 0) {
-    gCatena.SafePrintf("%010d - setup_scale done\n", millis());
+    gCatena.SafePrintf("Setup_scale done\n");
   }
 
   return res;
@@ -325,14 +318,14 @@ bool setup_scales(void)
 void setup_flash(void)
 {
   if (config_data.debug_level > 0) {
-    gCatena.SafePrintf("%010d - setup_flash\n", millis());
+    gCatena.SafePrintf("setup_flash\n");
   }
 
   if (gFlash.begin(&gSPI2, Catena::PIN_SPI2_FLASH_SS)) {
     fFlash = true;
     gFlash.powerDown();
     if (config_data.debug_level > 0) {
-      gCatena.SafePrintf("%010d - FLASH found, but power down\n", millis());
+      gCatena.SafePrintf("FLASH found, but power down\n");
     }
   }
   else {
@@ -340,7 +333,7 @@ void setup_flash(void)
     gFlash.end();
     gSPI2.end();
     if (config_data.debug_level > 0) {
-      gCatena.SafePrintf("%010d - No FLASH found: check hardware\n", millis());
+      gCatena.SafePrintf("FLASH found: check hardware\n");
     }
   }
 }
@@ -348,7 +341,7 @@ void setup_flash(void)
 void setup_uplink(void)
 {
   if (config_data.debug_level > 0) {
-    gCatena.SafePrintf("%010d - setup_uplink\n", millis());
+    gCatena.SafePrintf("setup_uplink\n");
   }
 
   LMIC_setClockError(1 * 65536 / 100);
@@ -359,14 +352,14 @@ void setup_uplink(void)
 
   // Do an unjoin, so every reboot will trigger a join
   if (config_data.debug_level > 0) {
-    gCatena.SafePrintf("%010d - do an unjoin...\n", millis());
+    gCatena.SafePrintf("do an unjoin...\n");
   }
   LMIC_unjoin();
 
   /* trigger a join by sending the first packet */
   if (!(gCatena.GetOperatingFlags() & static_cast<uint32_t>(gCatena.OPERATING_FLAGS::fManufacturingTest))) {
     if (!gLoRaWAN.IsProvisioned())
-      gCatena.SafePrintf("%010d - LoRaWAN not provisioned yet. Use the commands to set it up.\n");
+      gCatena.SafePrintf("LoRaWAN not provisioned yet. Use the commands to set it up.\n");
     else {
       if (config_data.debug_level > 1) {
         gLed.Set(LedPattern::Joining);
@@ -427,7 +420,7 @@ void ClearLoraData(void)
 
 void ShowLORAData(bool firstTime)
 {
-  gCatena.SafePrintf("%010d - ShowLORAData\n", millis());
+  gCatena.SafePrintf("ShowLORAData\n");
 
   if (firstTime) {
 
@@ -508,7 +501,7 @@ uint8_t GetVBatValue(int millivolts)
 void DoDeepSleep(uint32_t sleep_time)
 {
   if (config_data.debug_level > 0) {
-    gCatena.SafePrintf("%010d - now going to deep sleep\n", millis());
+    gCatena.SafePrintf("DoDeepSleep, now going to deep sleep\n");
   }
 
   // Prepare Deep Sleep
@@ -516,132 +509,76 @@ void DoDeepSleep(uint32_t sleep_time)
     gLed.Set(LedPattern::Off);
   }
 
-  Serial.end();
-  Wire.end();
-  SPI.end();
-  if (fFlash)
-    gSPI2.end();
+  deepSleepPrepare();
 
   // Now sleeping...
   gCatena.Sleep(sleep_time);
 
   // Recover from wakeup...
-  Serial.begin();
-  Wire.begin();
-  SPI.begin();
-  if (fFlash)
-    gSPI2.begin();
-  if (config_data.debug_level > 0) {
-    gCatena.SafePrintf("%010d - done with deep sleep\n", millis());
-  }
-}
-
-//Following functions are based on "https://github.com/dndubins/QuickStats", by David Dubins
-
-long median(long samples[], int m) //calculate the median
-{
-  //First bubble sort the values: https://en.wikipedia.org/wiki/Bubble_sort
-  long sorted[m];   // Define and initialize sorted array.
-  long temp = 0;    // Temporary float for swapping elements
-
-  for (int i = 0; i < m; i++) {
-    sorted[i] = samples[i];
-  }
-  bubbleSort(sorted, m); // Sort the values
-
-  if (bitRead(m, 0) == 1) { //If the last bit of a number is 1, it's odd. This is equivalent to "TRUE". Also use if m%2!=0.
-    return sorted[m / 2]; //If the number of data points is odd, return middle number.
-  } else {
-    return (sorted[(m / 2) - 1] + sorted[m / 2]) / 2; //If the number of data points is even, return avg of the middle two numbers.
-  }
-}
-
-void bubbleSort(long A[], int len) {
-  unsigned long newn;
-  unsigned long n = len;
-  long temp = 0;
-  do {
-    newn = 1;
-    for (int p = 1; p < len; p++) {
-      if (A[p - 1] > A[p]) {
-        temp = A[p];         //swap places in array
-        A[p] = A[p - 1];
-        A[p - 1] = temp;
-        newn = p;
-      } //end if
-    } //end for
-    n = newn;
-  } while (n > 1);
-}
-
-long my_read_average(byte gain, byte times) {
-  long res;
-  int const num_scale_readings = 25; // number of instantaneous scale readings to calculate the median
-
-  // we use the median, not the average, see https://community.particle.io/t/boron-gpio-provides-less-current-than-electrons-gpio/46647/13
-  long readings[num_scale_readings];  // create arry to hold readings
+  deepSleepRecovery();
 
   if (config_data.debug_level > 0) {
-    gCatena.SafePrintf("%010d - my_read_average, measurements: ", millis());
+    gCatena.SafePrintf("done with deep sleep\n");
   }
-
-  LoadCell.set_gain(gain);
-  // we wait 400ms (settling time according HX711 datasheet @ 10 SPS
-  delay(400);
-
-  for (int i = 0; i < num_scale_readings; i++) {
-    readings[i] = LoadCell.read();  // fill the array with instantaneous readings from the scale
-  }
-
-  res = median(readings, num_scale_readings); // calculate median
-
-  if (config_data.debug_level > 0) {
-    gCatena.SafePrintf("; median of %d samples: %d\n", num_scale_readings, res);
-  }
-
-  return res;
 }
 
 void ReadSensors(SENSOR_data &sensor_data) {
   SENSOR_data res;
   int32_t weight_current32;
+  long w1_0_real;
+  long w2_0_real;
 
   // vBat
-  gCatena.poll();
   int vbat_mv = (int)(gCatena.ReadVbat() * 1000.0f);
   res.vbat = GetVBatValue(vbat_mv);
   if (config_data.debug_level > 0) {
-    gCatena.SafePrintf("%010d - vBat:    %d mV\n", millis(), vbat_mv);
+    gCatena.SafePrintf("vBat:    %d mV\n", vbat_mv);
   }
 
   // Read Scales
+  w1_0_real = config_data.cal_w1_0;
+  w2_0_real = config_data.cal_w2_0;
   if (setup_scales()) {
     if (config_data.debug_level > 0) {
-      gCatena.SafePrintf("%010d - HX711 LoadCell is ready.\n", millis());
+      gCatena.SafePrintf("LoadCell is ready.\n");
     }
-    gCatena.poll();
-    res.weight1 = (int32_t)my_read_average(32, 7);
+    if (config_data.cal_w1_0 != NOT_ATTACHED) {
+      res.weight1 = (int32_t)ReadScale('A');
       if (config_data.debug_level > 0) {
-      gCatena.SafePrintf("%010d - Load_cell 1 weight1_current: %ld\n", millis(), res.weight1);
+        gCatena.SafePrintf("Load_cell 1 weight1_current: %ld\n", res.weight1);
       }
-    gCatena.poll();
-    res.weight2 = (int32_t)my_read_average(128, 7);
+    } else {
+      res.weight1 = 0;
+      w1_0_real = 0;
       if (config_data.debug_level > 0) {
-      gCatena.SafePrintf("%010d - Load_cell 2 weight2_current: %ld\n", millis(), res.weight2);
+        gCatena.SafePrintf("Load_cell 1 is disabled\n");
+      }
+    }
+    if (config_data.cal_w2_0 != NOT_ATTACHED) {
+      res.weight2 = (int32_t)ReadScale('B');
+      if (config_data.debug_level > 0) {
+        gCatena.SafePrintf("Load_cell 2 weight2_current: %ld\n", res.weight2);
+      }
+    } else {
+      res.weight2 = 0;
+      w2_0_real = 0;
+      if (config_data.debug_level > 0) {
+        gCatena.SafePrintf("Load_cell 2 is disabled\n");
+      }
     }
   }
   else {
     if (config_data.debug_level > 0) {
-      gCatena.SafePrintf("%010d - HX711 LoadCell not ready.\n", millis());
+      gCatena.SafePrintf("LoadCell not ready.\n");
     }
   }
 
   // Disable Power
-  gCatena.poll();
-  digitalWrite(D10, LOW);
+  PowerdownScale();
 
   // Gewicht berechnen
-  weight_current32 = (int32_t)((((res.weight1 - config_data.cal_w1_0) / config_data.cal_w1_factor) + ((res.weight2 - config_data.cal_w2_0) / config_data.cal_w2_factor)) / 5.0);
+  weight_current32 = (int32_t)((((res.weight1 - w1_0_real) / config_data.cal_w1_factor) + ((res.weight2 - w2_0_real) / config_data.cal_w2_factor)) / 5.0);
+
   if (weight_current32 < 0) {
     weight_current32 = 0;
   } else if (weight_current32 > UINT16_MAX) {
@@ -649,22 +586,23 @@ void ReadSensors(SENSOR_data &sensor_data) {
     // we set the weight to 0, as such high values are not realistic and probably a sign for bad calibration...
     weight_current32 = 0;
   }
+  if (config_data.cal_w1_0 == NOT_ATTACHED || config_data.cal_w2_0 == NOT_ATTACHED) {
+    // when at least one load cell is disabled, we multiply the measured weight by 2
+    weight_current32 = weight_current32 * 2;
+  }
   res.weight = (uint16_t)weight_current32;
 
   if (fBme) {
-    gCatena.poll();
     /* warm up the BME280 by discarding a measurement */
     (void)gBME280.readTemperature();
 
-    gCatena.poll();
     Adafruit_BME280::Measurements m = gBME280.readTemperaturePressureHumidity();
     // temperature is 2 bytes from -0x80.00 to +0x7F.FF degrees C
     // pressure is 2 bytes, hPa * 10.
     // humidity is one byte, where 0 == 0/256 and 0xFF == 255/256.
     if (config_data.debug_level > 0) {
       gCatena.SafePrintf(
-        "%010d - BME280:  T: %d P: %d RH: %d\n",
-        millis(),
+        "BME280:  T: %d P: %d RH: %d\n",
         (int)m.Temperature,
         (int)m.Pressure,
         (int)m.Humidity);
@@ -673,7 +611,7 @@ void ReadSensors(SENSOR_data &sensor_data) {
     res.humidity = (uint8_t)m.Humidity;
     res.pressure = (uint8_t)((m.Pressure / 100) - PRESSURE_OFFSET);
     if (config_data.debug_level > 0) {
-      gCatena.SafePrintf("%010d - pressure_current: %d\n", millis(), res.pressure);
+      gCatena.SafePrintf("pressure_current: %d\n", res.pressure);
     }
   }
 
@@ -694,7 +632,7 @@ void StartNewIteration() {
   // vBus
   float vBus = gCatena.ReadVbus();
   if (config_data.debug_level > 0) {
-    gCatena.SafePrintf("%010d - vBus:    %d mV\n", millis(), (int)(vBus * 1000.0f));
+    gCatena.SafePrintf("vBus:    %d mV\n", (int)(vBus * 1000.0f));
   }
   fUsbPower = (vBus > 4.3) ? true : false;
 
@@ -737,32 +675,48 @@ void StartNewIteration() {
   // we send data the first time the system is started, when the array is full
   // or when the weight has fallen more than threshold or the first measurement is
   // more than one hour old (which should not happen :-) )
-  if ( (next_package_is_init_package) || (my_position >= MAX_VALUES_TO_SEND) || ((last_sensor_reading.weight - current_sensor_reading.weight) > SEND_DIFF_THRESHOLD_5GRAMS) || ((millis() - timer_pos0) > 3600000)) {
+  if ( (next_package_is_init_package) || (my_position >= MAX_VALUES_TO_SEND) || (abs(last_sensor_reading.weight - current_sensor_reading.weight) > SEND_DIFF_THRESHOLD_5GRAMS) || ((millis() - timer_pos0) > 3600000)) {
     lora_data.offset_last_reading = (uint8_t)((millis() - timer_pos0) / 1000 / 60);
     if (config_data.debug_level > 0) {
-      gCatena.SafePrintf("%010d - startSendingUplink(), my_position: %d, iteration: %d, package_counter: %d\n", millis(), my_position, iteration, package_counter);
+      gCatena.SafePrintf("startSendingUplink(), my_position: %d, iteration: %d, package_counter: %d\n", my_position, iteration, package_counter);
     }
-    // the first 12 packets are "Init-Packets" or each INIT_PACKAGE_INTERVAL ...
+    // the first <INIT_PACKETS> packets are "Init-Packets" or each INIT_PACKAGE_INTERVAL ...
     startSendingUplink(next_package_is_init_package);
-    next_package_is_init_package = ((iteration < 12) || ((package_counter % INIT_PACKAGE_INTERVAL) == 0));
+    next_package_is_init_package = ((iteration < INIT_PACKETS) || ((package_counter % INIT_PACKAGE_INTERVAL) == 0));
 
     if (config_data.debug_level > 1) {
       gLed.Set(LedPattern::TwoShort);
     }
 
-    // Loop while sending is in progress, timeout just in case after 300 seconds
+    // Loop sending is in progress, timeout just in case after 300 seconds
     long start_time = millis();
     if (config_data.debug_level > 0) {
-      gCatena.SafePrintf("%010d - waiting while send is in progress\n", millis());
+      gCatena.SafePrintf("waiting while send is in progress\n");
     }
     while (send_in_progress && ((millis() - start_time) < 300000))
     {
       gCatena.poll();
       yield();
     }
+    // handle timeout...
+    if (send_in_progress) {
+      if (config_data.debug_level > 0) {
+        gCatena.SafePrintf("looks like we timed out waiting for sending to finish...\n", wait_time);
+      }
+      LMIC_clrTxData();
+      // we sleep 10 seconds...
+      start_time = millis();
+      while ((millis() - start_time) < 10000)
+      {
+        gCatena.poll();
+        yield();
+      }
+
+      send_in_progress = false;
+    }
     wait_time = (uint32_t)((millis() - start_time) / 1000);
     if (config_data.debug_level > 0) {
-      gCatena.SafePrintf("%010d - end waiting, wait time was %d seconds\n", millis(), wait_time);
+      gCatena.SafePrintf("end waiting, wait time was %d seconds\n", wait_time);
     }
   }
 
@@ -779,17 +733,17 @@ void StartNewIteration() {
     sleep_time_sec = 5;
   }
 
-  // for the first 12 iterations, we set the sleep time to 10 seconds only...
-  if (iteration <= 12) {
-    sleep_time_sec = 10;
+  // for the first <INIT_PACKETS> iterations, we set the sleep time to 120 seconds only...
+  if (iteration <= INIT_PACKETS) {
+    sleep_time_sec = 120;
   }
 
   if (config_data.debug_level > 0) {
-    gCatena.SafePrintf("%010d - now going to sleep for %d seconds...\n", millis(), sleep_time_sec);
+    gCatena.SafePrintf("now going to sleep for %d seconds...\n", sleep_time_sec);
     if (fUsbPower) {
-      gCatena.SafePrintf("%010d - USB Power is on\n", millis());
+      gCatena.SafePrintf("USB Power is on\n");
     } else {
-      gCatena.SafePrintf("%010d - USB Power is off\n", millis());
+      gCatena.SafePrintf("USB Power is off\n");
     }
     //Serial.flush();
     if (config_data.debug_level > 1) {
@@ -797,16 +751,32 @@ void StartNewIteration() {
     }
   }
 
+  // if we need to periodically reboot, we can do it now...
+  if (uint32_t(millis()) > gRebootMs) {
+    // time to reboot
+    if (config_data.debug_level > 0) {
+      gCatena.SafePrintf("Reached threshold to reboot...\n");
+      Serial.flush();
+    }
+    NVIC_SystemReset();
+  }
+
+  if (config_data.debug_level > 0) {
+    gCatena.SafePrintf("LMIC.opmode just before Sleeping: %#x\n", LMIC.opmode);
+    gCatena.SafePrintf("LMIC.globalDutyRate: %d, LMIC.globalDutyAvail: %d\n", LMIC.globalDutyRate, LMIC.globalDutyAvail );
+  }
+
   if (!fUsbPower) {
     DoDeepSleep(sleep_time_sec);
-    os_setTimedCallback(
-      &iterationJob,
-      os_getTime() + sec2osticks(2),
-      startNewIterationCb);
+    if (! stop_iterations) {
+      StartNewIteration();
+    }
+
   }
   else {
+    if (! stop_iterations) {
       if (config_data.debug_level > 0) {
-      gCatena.SafePrintf("%010d - light sleep; os_setTimedCallback for startNewIterationCb in %d...seconds\n", millis(), sleep_time_sec);
+        gCatena.SafePrintf("light sleep; os_setTimedCallback for startNewIterationCb in %d...seconds\n", sleep_time_sec);
       }
       os_setTimedCallback(
         &iterationJob,
@@ -814,6 +784,7 @@ void StartNewIteration() {
         startNewIterationCb);
     }
   }
+}
 
 void startSendingUplink(bool firstTime)
 {
@@ -841,16 +812,35 @@ void startSendingUplink(bool firstTime)
 
   if (firstTime) {
     if (config_data.debug_level > 0) {
-      gCatena.SafePrintf("%010d - SendBuffer firstTime\n", millis());
+      gCatena.SafePrintf("SendBuffer firstTime\n");
     }
-    gLoRaWAN.SendBuffer((uint8_t*)&lora_data_first, sizeof(LORA_data_first), sendBufferDoneCb, NULL, fConfirmed, kUplinkPort);
+    if (gLoRaWAN.SendBuffer((uint8_t*)&lora_data_first, sizeof(LORA_data_first), sendBufferDoneCb, NULL, fConfirmed, kUplinkPort)) {
       package_counter++;
+      if (config_data.debug_level > 0) {
+        gCatena.SafePrintf("LMIC.opmode just after SendBuffer (successful): %#x\n", LMIC.opmode);
+        gCatena.SafePrintf("LMIC.globalDutyRate: %d, LMIC.globalDutyAvail: %d\n", LMIC.globalDutyRate, LMIC.globalDutyAvail );
+      }
+    }
+    else {
+      gCatena.SafePrintf("LMIC.opmode just before SendBuffer (failed): %#x\n", LMIC.opmode);
+      gCatena.SafePrintf("LMIC.globalDutyRate: %d, LMIC.globalDutyAvail: %d\n", LMIC.globalDutyRate, LMIC.globalDutyAvail );
+    }
   } else {
     if (config_data.debug_level > 0) {
-      gCatena.SafePrintf("%010d - SendBuffer not firstTime\n", millis());
+      gCatena.SafePrintf("LMIC.opmode just before SendBuffer: %#x\n", LMIC.opmode);
+      gCatena.SafePrintf("LMIC.globalDutyRate: %d, LMIC.globalDutyAvail: %d\n", LMIC.globalDutyRate, LMIC.globalDutyAvail );
+      gCatena.SafePrintf("SendBuffer not firstTime\n");
     }
-    gLoRaWAN.SendBuffer((uint8_t*)&lora_data, sizeof(LORA_data), sendBufferDoneCb, NULL, fConfirmed, kUplinkPort);
+    if (gLoRaWAN.SendBuffer((uint8_t*)&lora_data, sizeof(LORA_data), sendBufferDoneCb, NULL, fConfirmed, kUplinkPort)) {
       package_counter++;
+      if (config_data.debug_level > 0) {
+        gCatena.SafePrintf("LMIC.opmode just after SendBuffer (successful): %#x\n", LMIC.opmode);
+        gCatena.SafePrintf("LMIC.globalDutyRate: %d, LMIC.globalDutyAvail: %d\n", LMIC.globalDutyRate, LMIC.globalDutyAvail );
+      }
+    } else {
+      gCatena.SafePrintf("LMIC.opmode just before SendBuffer (failed): %#x\n", LMIC.opmode);
+      gCatena.SafePrintf("LMIC.globalDutyRate: %d, LMIC.globalDutyAvail: %d\n", LMIC.globalDutyRate, LMIC.globalDutyAvail );
+    }
   }
 
   ClearLoraData();
@@ -864,6 +854,7 @@ static void sendBufferDoneCb(
 
   if (config_data.debug_level > 1) {
     gLed.Set(LedPattern::Settling);
+    gCatena.SafePrintf("LMIC.opmode in sendBufferDoneCb: %#x\n", LMIC.opmode);
   }
 
   pFn = settleDoneCb;
@@ -878,7 +869,7 @@ static void sendBufferDoneCb(
       gLoRaWAN.Shutdown();
     }
     else if (config_data.debug_level > 0) {
-      gCatena.SafePrintf("%010d - send buffer failed\n", millis());
+      gCatena.SafePrintf("send buffer failed, LMIC.opmode: %#x\n", LMIC.opmode);
     }
   }
 
@@ -902,61 +893,109 @@ static void txNotProvisionedCb(
   }
 }
 
+bool checkDeepSleep(void)
+{
+  return !fUsbPower;
+}
+
+void doSleepAlert(const bool fDeepSleep)
+{
+  if (config_data.debug_level > 0) {
+    gCatena.SafePrintf("We wait until is is safe to go to sleep...\n");
+  }
+
+  for (int i = 0; i <= 15; i++) {
+    long prevPrint = millis();
+    while (os_queryTimeCriticalJobs(ms2osticks(2000)) != 0)
+    {
+      gCatena.poll();
+      yield();
+      if (millis() - prevPrint > 1000) {
+        prevPrint = millis();
+        if (config_data.debug_level > 0) {
+          gCatena.SafePrintf("LMIC.opmode: %#x in loop %d\n", LMIC.opmode, i);
+        }
+      }
+    }
+  }
+
+  if (config_data.debug_level > 0) {
+    gCatena.SafePrintf("Now it is safe to go to sleep\n");
+  }
+
+}
+
+void updateSleepCounters(void)
+{
+  // update the sleep parameters
+  if (gTxCycleCount > 1)
+  {
+    // values greater than one are decremented and ultimately reset to default.
+    --gTxCycleCount;
+  }
+  else if (gTxCycleCount == 1)
+  {
+    // it's now one (otherwise we couldn't be here.)
+    if (config_data.debug_level > 0) {
+      gCatena.SafePrintf("resetting tx cycle to default: %u\n", CATCFG_T_CYCLE);
+    }
+    gTxCycleCount = 0;
+    gTxCycle = CATCFG_T_CYCLE;
+  }
+  else
+  {
+    // it's zero. Leave it alone.
+  }
+}
+
 
 static void settleDoneCb(
   osjob_t* pSendJob)
 {
   if (config_data.debug_level > 0) {
-    gCatena.SafePrintf("%010d - settleDoneCb\n", millis());
+    gCatena.SafePrintf("settleDoneCb - we are at the end of the callback chain!\n");
   }
 
-  if (config_data.debug_level > 2) {
-    // Terry vv
-    gCatena.SafePrintf("LMIC.rxDelay: %i\n", LMIC.rxDelay);
-    gCatena.SafePrintf("LMIC.dn2Dr: %i\n", LMIC.dn2Dr);
-    gCatena.SafePrintf("LMIC.dn2Freq: %i\n", LMIC.dn2Freq);
-    gCatena.SafePrintf("LMIC.rx1DrOffset: %i\n", LMIC.rx1DrOffset);
-    gCatena.SafePrintf("LMIC.adrAckReq: %i\n", LMIC.adrAckReq);
-    gCatena.SafePrintf("LMIC.adrEnabled: %i\n", LMIC.adrEnabled);
-    // Terry ^^
-  }
+  const bool fDeepSleep = checkDeepSleep();
 
-  if (uint32_t(millis()) > gRebootMs) {
+  if (uint32_t(millis()) > gRebootMs)
+  {
     // time to reboot
     NVIC_SystemReset();
   }
 
-  sleepDoneCb(pSendJob);
-}
+  doSleepAlert(fDeepSleep);
 
-static void sleepDoneCb(osjob_t* pJob)
-{
-  if (config_data.debug_level > 1) {
-    gLed.Set(LedPattern::WarmingUp);
-  }
+  /* count what we're up to */
+  updateSleepCounters();
 
-  if (config_data.debug_level > 0) {
-    gCatena.SafePrintf("%010d - sleepDoneCb\n", millis());
-  }
-
-  os_setTimedCallback(
-    pJob,
-    os_getTime() + sec2osticks(CATCFG_T_WARMUP),
-    warmupDoneCb);
-}
-
-static void warmupDoneCb(osjob_t* pJob)
-{
-  if (config_data.debug_level > 0) {
-    gCatena.SafePrintf("%010d - warmupDoneCb\n", millis());
-  }
   send_in_progress = false;
 }
 
+void deepSleepPrepare(void)
+{
+  Serial.end();
+  Wire.endTransmission(true);
+  Wire.end();
+  SPI.end();
+  if (fFlash)
+    gSPI2.end();
+}
+
+void deepSleepRecovery(void)
+{
+  Serial.begin();
+  Wire.begin();
+  SPI.begin();
+  if (fFlash)
+    gSPI2.begin();
+}
+
+
 static void startNewIterationCb(osjob_t* pJob)
 {
   if (config_data.debug_level > 0) {
-    gCatena.SafePrintf("%010d - startNewIterationCb\n", millis());
+    gCatena.SafePrintf("startNewIterationCb\n");
   }
 
   if (! stop_iterations) {
@@ -966,6 +1005,9 @@ static void startNewIterationCb(osjob_t* pJob)
 
 static void receiveMessage(void *pContext, uint8_t port, const uint8_t *pMessage, size_t nMessage)
 {
+  unsigned txCycle;
+  unsigned txCount;
+
   long cal_w1_0;
   long cal_w2_0;
   float cal_w1_factor;
@@ -976,10 +1018,8 @@ static void receiveMessage(void *pContext, uint8_t port, const uint8_t *pMessage
     float fval;
   } u;
 
-  SENSOR_data temp_sensor_data;
-
   if (config_data.debug_level > 0) {
-    gCatena.SafePrintf("%010d - receiveMessage was called!!!\n", millis());
+    gCatena.SafePrintf("receiveMessage was called!!!\n");
   }
 
   if (config_data.debug_level > 2) {
@@ -1057,7 +1097,7 @@ static void receiveMessage(void *pContext, uint8_t port, const uint8_t *pMessage
 
       config_data.cal_w1_0 = cal_w1_0;
       config_data.cal_w2_0 = cal_w2_0;
-      gCatena.getFram()->saveField(cFramStorage::kBme680Cal, (const uint8_t *)&config_data, sizeof(config_data));
+      gCatena.getFram()->saveField(cFramStorage::kAppConf, (const uint8_t *)&config_data, sizeof(config_data));
       lora_data_first.cal_w1_0 = config_data.cal_w1_0;
       lora_data_first.cal_w2_0 = config_data.cal_w2_0;
     }
@@ -1073,7 +1113,7 @@ static void receiveMessage(void *pContext, uint8_t port, const uint8_t *pMessage
       config_data.cal_w2_0 = cal_w2_0;
       config_data.cal_w1_factor = cal_w1_factor;
       config_data.cal_w2_factor = cal_w2_factor;
-      gCatena.getFram()->saveField(cFramStorage::kBme680Cal, (const uint8_t *)&config_data, sizeof(config_data));
+      gCatena.getFram()->saveField(cFramStorage::kAppConf, (const uint8_t *)&config_data, sizeof(config_data));
 
       lora_data_first.cal_w1_0 = config_data.cal_w1_0;
       lora_data_first.cal_w2_0 = config_data.cal_w2_0;
@@ -1081,8 +1121,60 @@ static void receiveMessage(void *pContext, uint8_t port, const uint8_t *pMessage
       lora_data_first.cal_w2_factor = config_data.cal_w2_factor;
     }
   }
+
+  if (port == 0)
+  {
+    return;
   }
 
+  else if (! (port == 1 && 2 <= nMessage && nMessage <= 3))
+  {
+    if (config_data.debug_level > 0) {
+      gCatena.SafePrintf("invalid message port(%02x)/length(%x)\n",
+                         port, nMessage
+                        );
+    }
+    return;
+  }
+
+  txCycle = (pMessage[0] << 8) | pMessage[1];
+
+  if (txCycle < CATCFG_T_MIN || txCycle > CATCFG_T_MAX)
+  {
+    if (config_data.debug_level > 0) {
+      gCatena.SafePrintf("tx cycle time out of range: %u\n", txCycle);
+    }
+    return;
+  }
+
+  // byte [2], if present, is the repeat count.
+  // explicitly sending zero causes it to stick.
+  txCount = CATCFG_INTERVAL_COUNT;
+  if (nMessage >= 3)
+  {
+    txCount = pMessage[2];
+  }
+
+  setTxCycleTime(txCycle, txCount);
+
+}
+
+void setTxCycleTime(unsigned txCycle, unsigned txCount)
+{
+  if (txCount > 0) {
+    if (config_data.debug_level > 0) {
+      gCatena.SafePrintf("message cycle time %u seconds for %u messages\n", txCycle, txCount);
+    }
+  }
+  else if (config_data.debug_level > 0) {
+    gCatena.SafePrintf("message cycle time %u seconds indefinitely\n", txCycle);
+  }
+
+  gTxCycle = txCycle;
+  gTxCycleCount = txCount;
+}
+
+
 /* process "application hello" -- args are ignored */
 // argv[0] is "hello"
 // argv[1..argc-1] are the (ignored) arguments
@@ -1141,8 +1233,8 @@ cCommandStream::CommandStatus cmdGetScale2(cCommandStream *pThis, void *pContext
 cCommandStream::CommandStatus cmdCalibrateZeroScaleA(cCommandStream * pThis, void *pContext, int argc, char **argv)
 {
   setup_scales();
-  config_data.cal_w1_0 = (int32_t)my_read_average(32, 10);
-  gCatena.getFram()->saveField(cFramStorage::kBme680Cal, (const uint8_t *)&config_data, sizeof(config_data));
+  config_data.cal_w1_0 = (int32_t)ReadScale('A');
+  gCatena.getFram()->saveField(cFramStorage::kAppConf, (const uint8_t *)&config_data, sizeof(config_data));
   pThis->printf("{ \"msg\": \"calibrate_zero_scale_a was successful\" }\n");
 
   return cCommandStream::CommandStatus::kSuccess;
@@ -1151,8 +1243,8 @@ cCommandStream::CommandStatus cmdCalibrateZeroScaleA(cCommandStream *pThis, void
 cCommandStream::CommandStatus cmdCalibrateZeroScaleB(cCommandStream * pThis, void *pContext, int argc, char **argv)
 {
   setup_scales();
-  config_data.cal_w2_0 = (int32_t)my_read_average(128, 10);
-  gCatena.getFram()->saveField(cFramStorage::kBme680Cal, (const uint8_t *)&config_data, sizeof(config_data));
+  config_data.cal_w2_0 = (int32_t)ReadScale('B');
+  gCatena.getFram()->saveField(cFramStorage::kAppConf, (const uint8_t *)&config_data, sizeof(config_data));
   pThis->printf("{ \"msg\": \"calibrate_zero_scale_b was successful\" }\n");
 
   return cCommandStream::CommandStatus::kSuccess;
@@ -1162,11 +1254,18 @@ cCommandStream::CommandStatus cmdCalibrateScaleA(cCommandStream *pThis, void *pC
 {
   String w1_gramm(argv[1]);
   long weight1;
-  setup_scales();
-  weight1 = my_read_average(32, 10);
-  config_data.cal_w1_factor = (float)((weight1 - config_data.cal_w1_0) / w1_gramm.toFloat());
 
-  gCatena.getFram()->saveField(cFramStorage::kBme680Cal, (const uint8_t *)&config_data, sizeof(config_data));
+  if (w1_gramm == "NA") {
+    // scale a is not connected
+    config_data.cal_w1_factor = 1.0;
+    config_data.cal_w1_0 = NOT_ATTACHED;
+  } else {
+    setup_scales();
+    weight1 = ReadScale('A');
+    config_data.cal_w1_factor = (float)((weight1 - config_data.cal_w1_0) / w1_gramm.toFloat());
+  }
+
+  gCatena.getFram()->saveField(cFramStorage::kAppConf, (const uint8_t *)&config_data, sizeof(config_data));
 
   pThis->printf("{ \"msg\": \"calibrate_scale_a was successful\" }\n");
 
@@ -1177,11 +1276,18 @@ cCommandStream::CommandStatus cmdCalibrateScaleB(cCommandStream *pThis, void *pC
 {
   String w2_gramm(argv[1]);
   long weight2;
-  setup_scales();
-  weight2 = my_read_average(128, 10);
-  config_data.cal_w2_factor = (float)((weight2 - config_data.cal_w2_0) / w2_gramm.toFloat());
 
-  gCatena.getFram()->saveField(cFramStorage::kBme680Cal, (const uint8_t *)&config_data, sizeof(config_data));
+  if (w2_gramm == "NA") {
+    // scale b is not connected
+    config_data.cal_w2_factor = 1.0;
+    config_data.cal_w2_0 = NOT_ATTACHED;
+  } else {
+    setup_scales();
+    weight2 = ReadScale('B');
+    config_data.cal_w2_factor = (float)((weight2 - config_data.cal_w2_0) / w2_gramm.toFloat());
+  }
+
+  gCatena.getFram()->saveField(cFramStorage::kAppConf, (const uint8_t *)&config_data, sizeof(config_data));
 
   pThis->printf("{ \"msg\": \"calibrate_scale_b was successful\" }\n");
 
@@ -1192,7 +1298,9 @@ cCommandStream::CommandStatus cmdSetDebugLevel(cCommandStream *pThis, void *pCon
 {
   String s_debug_level(argv[1]);
   config_data.debug_level = s_debug_level.toInt();
-  gCatena.getFram()->saveField(cFramStorage::kBme680Cal, (const uint8_t *)&config_data, sizeof(config_data));
+  gCatena.getFram()->saveField(cFramStorage::kAppConf, (const uint8_t *)&config_data, sizeof(config_data));
+
+  SetScalesDebugLevel(config_data.debug_level);
 
   pThis->printf("{ \"msg\": \"set_debug_level was successful\" }\n");
 
@@ -1201,7 +1309,7 @@ cCommandStream::CommandStatus cmdSetDebugLevel(cCommandStream *pThis, void *pCon
 
 cCommandStream::CommandStatus cmdGetDebugLevel(cCommandStream * pThis, void *pContext, int argc, char **argv)
 {
-  gCatena.getFram()->saveField(cFramStorage::kBme680Cal, (const uint8_t *)&config_data, sizeof(config_data));
+  gCatena.getFram()->saveField(cFramStorage::kAppConf, (const uint8_t *)&config_data, sizeof(config_data));
 
   pThis->printf("{ \"msg\": \"debug_level is %d\" }\n", config_data.debug_level);
 

mini_beieli_node.h

@@ -15,10 +15,10 @@ enum {
   // add measurement and broadcast time, but we attempt
   // to compensate for the gross effects below.
   CATCFG_T_CYCLE = 6 * 60,                // every 6 minutes
-  //CATCFG_T_CYCLE = 30, // for Testing
-  CATCFG_T_CYCLE_TEST = 30, // every 10 seconds
+  //CATCFG_T_CYCLE = 30,                  // for Testing (Swisscom Compliance)
+  CATCFG_T_CYCLE_TEST = 30,               // every 30 seconds
   CATCFG_T_CYCLE_INITIAL = 30,            // every 30 seconds initially
-  CATCFG_INTERVAL_COUNT_INITIAL = 30,     // repeat for 15 minutes
+  CATCFG_INTERVAL_COUNT_INITIAL = 10,     // repeat for 5 minutes
   CATCFG_T_REBOOT = 30 * 24 * 60 * 60,    // reboot every 30 days
 };
 
@@ -26,7 +26,7 @@ enum {
 enum {
   CATCFG_T_WARMUP = 1,
   CATCFG_T_SETTLE = 5,
-  CATCFG_T_OVERHEAD = (CATCFG_T_WARMUP + CATCFG_T_SETTLE),
+  CATCFG_T_OVERHEAD = (CATCFG_T_WARMUP + CATCFG_T_SETTLE + 4),
   CATCFG_T_MIN = CATCFG_T_OVERHEAD,
   CATCFG_T_MAX = CATCFG_T_CYCLE < 60 * 60 ? 60 * 60 : CATCFG_T_CYCLE,     // normally one hour max.
   CATCFG_INTERVAL_COUNT = 30,
@@ -56,7 +56,7 @@ enum {
   |
   \****************************************************************************/
 
-static const int32_t fwVersion = 20200207;
+static const int32_t fwVersion = 20200603;
 
 static const byte INIT_PACKAGE_INTERVAL = 100;  // send an init package every 100 packages;
 static const byte MAX_VALUES_TO_SEND = 8;
@@ -64,16 +64,18 @@ static const byte MAX_VALUES_TO_SEND = 8;
 static const uint8_t LORA_DATA_VERSION = 1;
 static const uint8_t LORA_DATA_VERSION_FIRST_PACKAGE = 128;
 static const uint32_t PRESSURE_OFFSET = 825;
-static const uint16_t SEND_DIFF_THRESHOLD_5GRAMS = 10;   // when weight value drops by 50g, then send data
+static const uint16_t SEND_DIFF_THRESHOLD_5GRAMS = 20;   // when weight changes by 100g, then send data
+static const long NOT_ATTACHED = -2147483648;
+static const byte INIT_PACKETS = 5;
 
-// must be 139 bytes long (size of kBme680Cal)
+// must be 64 bytes long (size of kAppConf)
 typedef struct {
-  long cal_w1_0;                                     // 4 Bytes, Wert Waegezelle 1 ohne Gewicht
-  long cal_w2_0;                                     // 4 Bytes, Wert Waegezelle 2 ohne Gewicht
+  long cal_w1_0;                                     // 4 Bytes, Wert Waegezelle 1 ohne Gewicht, LONG_MIN when not connected
+  long cal_w2_0;                                     // 4 Bytes, Wert Waegezelle 2 ohne Gewicht, LONG_MIN when not connected
   float cal_w1_factor;                               // 4 Bytes, Kalibrationsfaktor Waegezelle 1
   float cal_w2_factor;                               // 4 Bytes, Kalibrationsfaktor Waegezelle 2
   byte debug_level;                                  // 0 => no debugging, no led, 1 => infos, no led, 2 => infos, 3 => error, 4 => highest level
-  byte fill[122];
+  byte fill[47];
 } __attribute__((packed)) CONFIG_data;
 
 typedef struct {

mini_beieli_node_hx711.h

@@ -0,0 +1,94 @@
+#define SAMPLES 10
+
+#include <Q2HX711.h>
+
+#ifndef _HELPER_H_
+#include "helper.h"
+#endif
+
+// Scales
+Q2HX711 hx711(A1, A0);
+
+byte debug_level;
+
+void SetScalesDebugLevel(byte dbg_level)
+{
+  debug_level = dbg_level;
+}
+
+bool SetupScales(byte dbg_level)
+{
+  debug_level = dbg_level;
+  if (debug_level > 0) {
+    gCatena.SafePrintf("setup_scales\n");
+  }
+
+  bool res;
+  res = true;
+
+  // Use D10 to regulate power
+  pinMode(D10, OUTPUT);
+
+  if (debug_level > 0) {
+    gCatena.SafePrintf("setup_scale done\n");
+  }
+
+  return res;
+}
+
+long ReadScale(char channel)
+{
+  if (channel == 'B') {
+    hx711.setGain(128);
+  } else {
+    hx711.setGain(32);
+  }
+  delay(500);
+
+  long res;
+  int const num_scale_readings = 25; // number of instantaneous scale readings to calculate the median
+
+  // we use the median, not the average, see https://community.particle.io/t/boron-gpio-provides-less-current-than-electrons-gpio/46647/13
+  long readings[num_scale_readings];  // create arry to hold readings
+
+  if (debug_level > 0) {
+    gCatena.SafePrintf("my_read_average, measurements:\n");
+  }
+
+  for (int i = 0; i < num_scale_readings; i++) {
+    readings[i] = hx711.read();  // fill the array with instantaneous readings from the scale
+    if (debug_level > 1) {
+      gCatena.SafePrintf("Reading %d: %d\n", i, readings[i]);
+    }
+  }
+
+  res = median(readings, num_scale_readings); // calculate median
+
+  if (debug_level > 0) {
+    gCatena.SafePrintf("Median of %d samples: %d\n", num_scale_readings, res);
+    float sdev;
+    sdev = stddev(readings, num_scale_readings);
+    gCatena.SafePrintf("Standard Deviation: %d.%03d\n", (int)sdev, (int)abs(sdev * 1000) % 1000);
+  }
+
+  return res;
+}
+
+void PowerdownScale()
+{
+  // Disable Power
+  digitalWrite(D10, LOW);
+}
+
+void PowerupScale()
+{
+  // Enable Power
+  digitalWrite(D10, HIGH);
+
+  // we wait 400ms (settling time according HX711 datasheet @ 10 SPS
+  delay(400);
+
+  if (debug_level > 0) {
+    gCatena.SafePrintf("setup_scale done\n");
+  }
+}

mini_beieli_node_nau7802.h

@@ -0,0 +1,176 @@
+#pragma once
+
+#include <Wire.h>
+
+#ifndef _HELPER_H_
+#include "helper.h"
+#endif
+
+#include "SparkFun_Qwiic_Scale_NAU7802_Arduino_Library.h"
+
+#define SAMPLES 5
+
+NAU7802 myScale; //Create instance of the NAU7802 class
+
+byte debug_level;
+
+//byte interruptPin = A0;
+
+void SetScalesDebugLevel(byte dbg_level)
+{
+  debug_level = dbg_level;
+}
+
+bool InitializeScales()
+{
+  bool result;
+  result = myScale.reset(); //Reset all registers
+  result &= myScale.powerUp(); //Power on analog and digital sections of the scale
+
+  result &= myScale.setIntPolarityHigh();
+  result &= myScale.setLDO(NAU7802_LDO_3V3); //Set LDO to 3.3V
+  result &= myScale.setGain(NAU7802_GAIN_128); //Set gain to 128
+  result &= myScale.setSampleRate(NAU7802_SPS_40); //Set samples per second to 40
+  result &= myScale.setRegister(NAU7802_ADC, 0x30); //Turn off CLK_CHP. From 9.1 power on sequencing.
+  result &= myScale.clearBit(NAU7802_PGA_PWR_PGA_CAP_EN, NAU7802_PGA_PWR);
+  //result &= myScale.setRegister(NAU7802_OTP_B1, 0x30);
+  //result &= myScale.setRegister(NAU7802_PGA, NAU7802_PGA_OUT_EN | NAU7802_PGA_CHP_DIS);
+
+  result &= myScale.calibrateAFE(); //Re-cal analog front end when we change gain, sample rate, or channel
+
+  return result;
+}
+
+bool SetupScales(byte dbg_level)
+{
+  debug_level = dbg_level;
+  if (debug_level > 0) {
+    gCatena.SafePrintf("SetupScales start\n");
+  }
+//  pinMode(interruptPin, INPUT);
+
+  if (!myScale.begin(Wire, false))
+  {
+    gCatena.SafePrintf("Scale not detected. Please check wiring. Freezing...\n");
+    return false;
+  }
+  gCatena.SafePrintf("Scale detected!\n");
+
+  bool result = InitializeScales();
+  if (debug_level > 0) {
+    gCatena.SafePrintf("SetupScales done, result: %d\n", result);
+  }
+
+  return result;
+}
+
+long ReadScale(char channel)
+{
+  long res;
+
+  if (debug_level > 0) {
+    gCatena.SafePrintf("ReadScale Start, Channel %c\n",  channel);
+  }
+
+  uint8_t channelNumber;
+  if (channel == 'B') {
+    channelNumber = NAU7802_CHANNEL_1;
+  } else {
+    channelNumber = NAU7802_CHANNEL_2;
+  }
+  long startTime = millis();
+  myScale.setChannel(channelNumber);
+  bool calibrate_success = myScale.calibrateAFE();
+  if (! calibrate_success) {
+    if (debug_level > 0) {
+      gCatena.SafePrintf("Error: Calibration not successful!\n");
+    }
+  }
+
+  if (myScale.available()) {
+    long dummy = myScale.getReading();
+  }
+  int const num_scale_readings = SAMPLES; // number of instantaneous scale readings to calculate the median
+
+  // we use the median, not the average, see https://community.particle.io/t/boron-gpio-provides-less-current-than-electrons-gpio/46647/13
+  long readings[num_scale_readings];  // create arry to hold readings
+  for (int i = 0; i < num_scale_readings; i++) {
+    //while (digitalRead(interruptPin) == LOW) {
+    long mytimer = millis();
+    while (! myScale.available()) {
+      // we set a timeout of 10 seconds for the measurement...
+      if ((millis() - mytimer) > 10000) {
+        // Timeout reading scale...
+        Wire.endTransmission(true);
+        if (debug_level > 0) {
+          gCatena.SafePrintf("Timeout while reading scale...\n");
+        }
+        break;
+      }
+      delay(1);
+    }
+    long reading;
+    if (myScale.available()) {
+      reading = myScale.getReading();  
+      readings[i] = reading;  
+    }
+    if (debug_level > 0) {
+      gCatena.SafePrintf("Reading: %d\n", reading);
+    }
+    delay(10);
+  }
+
+  long duration = millis() - startTime;
+  res = median(readings, num_scale_readings); // calculate median
+
+  if (debug_level > 0) {
+    gCatena.SafePrintf("Median of %d samples: %d\n", num_scale_readings, res);
+    float sdev;
+    sdev = stddev(readings, num_scale_readings);
+    float sdev_proc;
+    sdev_proc = 100 * (sdev / float(res));
+    gCatena.SafePrintf("Measurements: [");
+    for (int i = 0; i < num_scale_readings; i++) {
+      gCatena.SafePrintf("%d", readings[i]);
+      if (i < (SAMPLES - 1)) {
+        gCatena.SafePrintf(",");
+      }
+
+    }
+    gCatena.SafePrintf("]\n");
+
+    gCatena.SafePrintf("Standard Deviation: %d.%03d\n", (int)sdev, (int)abs(sdev * 1000) % 1000);
+    gCatena.SafePrintf("Standard Deviation / Median (Percent): %d.%03d\n", (int)sdev_proc, (int)abs(sdev_proc * 1000) % 1000);
+    gCatena.SafePrintf("Duration (ms): %d\n", duration);
+  }
+
+  if (debug_level > 0) {
+    gCatena.SafePrintf("ReadScale Done\n");
+  }
+
+  return res;
+}
+
+void PowerdownScale()
+{
+  if (debug_level > 0) {
+    gCatena.SafePrintf("PowerdownScale Start\n");
+  }
+  myScale.powerDown();
+  if (debug_level > 0) {
+    gCatena.SafePrintf("PowerdownScale Done\n");
+  }
+}
+
+void PowerupScale()
+{
+  if (debug_level > 0) {
+    gCatena.SafePrintf("PowerupScale Start\n");
+  }
+
+  InitializeScales();
+
+  if (debug_level > 0) {
+    gCatena.SafePrintf("PowerupScale Done\n");
+  }
+}