mini-beieli-node/mini-beieli-node.ino

/*

  mini-beieli-node.ino

  BeieliScale, see https://mini-beieli.ch

  Joerg Lehmann, nbit Informatik GmbH

*/

#include <Catena.h>

#include <Catena_Led.h>
#include <Catena_CommandStream.h>
#include <Catena_Mx25v8035f.h>

#include <Wire.h>
#include <Adafruit_Sensor.h>
#include <Adafruit_BME280.h>
#include <Arduino_LoRaWAN.h>
#include <lmic.h>
#include <hal/hal.h>
#include <mcciadk_baselib.h>

#include <cmath>
#include <type_traits>

#include <HX711.h>
#include "mini_beieli_node.h"

using namespace McciCatena;

// forwards
static void settleDoneCb(osjob_t* pSendJob);
static void warmupDoneCb(osjob_t* pSendJob);
static void startNewIterationCb(osjob_t* pJob);
static void txNotProvisionedCb(osjob_t *pSendJob);
static void sleepDoneCb(osjob_t* pSendJob);
static Arduino_LoRaWAN::SendBufferCbFn sendBufferDoneCb;
static Arduino_LoRaWAN::ReceivePortBufferCbFn receiveMessage;

// Additional Commands
// forward reference to the command function
cCommandStream::CommandFn cmdHello;
cCommandStream::CommandFn cmdGetCalibrationSettings;
cCommandStream::CommandFn cmdGetSensorReadings;
cCommandStream::CommandFn cmdGetScaleA;
cCommandStream::CommandFn cmdGetScaleB;
cCommandStream::CommandFn cmdCalibrateZeroScaleA;
cCommandStream::CommandFn cmdCalibrateZeroScaleB;
cCommandStream::CommandFn cmdCalibrateScaleA;
cCommandStream::CommandFn cmdCalibrateScaleB;
cCommandStream::CommandFn cmdSetDebugLevel;
cCommandStream::CommandFn cmdGetDebugLevel;

// the individual commmands are put in this table
static const cCommandStream::cEntry sMyExtraCommmands[] =
{
  { "hello", cmdHello },
  { "get_calibration_settings", cmdGetCalibrationSettings },
  { "get_sensor_readings", cmdGetSensorReadings },
  { "calibrate_zero_scale_a", cmdCalibrateZeroScaleA },
  { "calibrate_zero_scale_b", cmdCalibrateZeroScaleB },
  { "calibrate_scale_a", cmdCalibrateScaleA },
  { "calibrate_scale_b", cmdCalibrateScaleB },
  { "set_debug_level", cmdSetDebugLevel },
  { "get_debug_level", cmdGetDebugLevel },
  // other commands go here....
};

/* a top-level structure wraps the above and connects to the system table */
/* it optionally includes a "first word" so you can for sure avoid name clashes */
static cCommandStream::cDispatch
sMyExtraCommands_top(
  sMyExtraCommmands,          /* this is the pointer to the table */
  sizeof(sMyExtraCommmands),  /* this is the size of the table */
  "application"                   /* this is the "first word" for all the commands in this table*/
);


/****************************************************************************\
  |
  | VARIABLES
  |
  \****************************************************************************/

byte my_position = 0;    // what is our actual measurement, starts with 0
long timer_pos0;

// Global Variables
LORA_data lora_data;
LORA_data_first lora_data_first;
CONFIG_data config_data;
SENSOR_data last_sensor_reading;
long iteration = 0;      // what iteration number do we have, starts with 0

// generic timer
long t_cur;

// the primary object
Catena gCatena;

//
// the LoRaWAN backhaul.  Note that we use the
// Catena version so it can provide hardware-specific
// information to the base class.
//
Catena::LoRaWAN gLoRaWAN;

//
// the LED
StatusLed gLed(Catena::PIN_STATUS_LED);

//   The temperature/humidity sensor
Adafruit_BME280 gBME280; // The default initalizer creates an I2C connection
bool fBme;

SPIClass gSPI2(
  Catena::PIN_SPI2_MOSI,
  Catena::PIN_SPI2_MISO,
  Catena::PIN_SPI2_SCK);

//   The flash
Catena_Mx25v8035f gFlash;
bool fFlash;

// Scales
HX711 LoadCell;

//  USB power
bool fUsbPower;

// have we printed the sleep info?
bool g_fPrintedSleeping = false;

//  the job that's used to synchronize us with the LMIC code
static osjob_t sensorJob;
static osjob_t iterationJob;

void setup(void)
{
  gCatena.begin();
  ClearLoraData();

  // Use D10 to regulate power
  pinMode(D10, OUTPUT);

  setup_platform();
  setup_bme280();
  //setup_scales();

  setup_flash();
  setup_uplink();
}

void setup_platform(void)
{

  /* add our application-specific commands */
  gCatena.addCommands(
    sMyExtraCommands_top,
    nullptr
  );

  // read config_data from fram...
  if (config_data.debug_level > 0) {
    gCatena.SafePrintf("Reading Calibration Config from FRAM...\n");
  }
  gCatena.getFram()->getField(cFramStorage::kBme680Cal, (uint8_t *)&config_data, sizeof(config_data));

  if (config_data.debug_level > 0) {
    gCatena.SafePrintf("cal_w1_0: %d\n", config_data.cal_w1_0);
    gCatena.SafePrintf("cal_w2_0: %d\n", config_data.cal_w2_0);
    gCatena.SafePrintf("cal_w1_factor: %d.%03d\n", (int)config_data.cal_w1_factor, (int)(config_data.cal_w1_factor * 1000) % 1000);
    gCatena.SafePrintf("cal_w2_factor: %d.%03d\n", (int)config_data.cal_w2_factor, (int)(config_data.cal_w2_factor * 1000) % 1000);
    gCatena.SafePrintf("debug_level: %d\n", (int)config_data.debug_level);
    gCatena.SafePrintf("Size of config_data: %d\n", sizeof(config_data));
    gCatena.SafePrintf("Size of lora_data_first: %d\n", sizeof(lora_data_first));
    gCatena.SafePrintf("Size of lora_data: %d\n", sizeof(lora_data));
  }


#ifdef USBCON
  // if running unattended, don't wait for USB connect.
  if (!(gCatena.GetOperatingFlags() & static_cast<uint32_t>(gCatena.OPERATING_FLAGS::fUnattended))) {
    while (!Serial)
      /* wait for USB attach */
      yield();
  }
#endif

  gCatena.SafePrintf("\n");
  gCatena.SafePrintf("-------------------------------------------------------------------------------\n");
  gCatena.SafePrintf("mini-beieli.ch - BeieliScale Version %d.\n", fwVersion);
  {
    char sRegion[16];
    gCatena.SafePrintf("Target network: %s / %s\n",
                       gLoRaWAN.GetNetworkName(),
                       gLoRaWAN.GetRegionString(sRegion, sizeof(sRegion)));
  }
  gCatena.SafePrintf("Enter 'help' for a list of commands.\n");

#ifdef CATENA_CFG_SYSCLK
  gCatena.SafePrintf("SYSCLK: %d MHz\n", CATENA_CFG_SYSCLK);
#endif

#ifdef USBCON
  gCatena.SafePrintf("USB enabled\n");
#else
  gCatena.SafePrintf("USB disabled\n");
#endif

  Catena::UniqueID_string_t CpuIDstring;

  gCatena.SafePrintf(
    "CPU Unique ID: %s\n",
    gCatena.GetUniqueIDstring(&CpuIDstring));

  gCatena.SafePrintf("--------------------------------------------------------------------------------\n");
  gCatena.SafePrintf("\n");

  // set up the LED
  gLed.begin();
  gCatena.registerObject(&gLed);
  gLed.Set(LedPattern::FastFlash);

  // set up LoRaWAN
  gCatena.SafePrintf("LoRaWAN init: ");
  if (!gLoRaWAN.begin(&gCatena)) {
    gCatena.SafePrintf("failed\n");
  }
  else {
    gCatena.SafePrintf("succeeded\n");
  }

  gLoRaWAN.SetReceiveBufferBufferCb(receiveMessage);
  gCatena.registerObject(&gLoRaWAN);

  /* find the platform */
  const Catena::EUI64_buffer_t* pSysEUI = gCatena.GetSysEUI();

  uint32_t flags;
  const CATENA_PLATFORM* const pPlatform = gCatena.GetPlatform();

  if (pPlatform) {
    gCatena.SafePrintf("EUI64: ");
    for (unsigned i = 0; i < sizeof(pSysEUI->b); ++i) {
      gCatena.SafePrintf("%s%02x", i == 0 ? "" : "-", pSysEUI->b[i]);
    }
    gCatena.SafePrintf("\n");
    flags = gCatena.GetPlatformFlags();
    gCatena.SafePrintf(
      "Platform Flags:  %#010x\n",
      flags);
    gCatena.SafePrintf(
      "Operating Flags:  %#010x\n",
      gCatena.GetOperatingFlags());
  }
  else {
    gCatena.SafePrintf("**** no platform, check provisioning ****\n");
    flags = 0;
  }

}

void setup_bme280(void)
{
  if (gBME280.begin(BME280_ADDRESS, Adafruit_BME280::OPERATING_MODE::Sleep)) {
    fBme = true;
  }
  else {
    fBme = false;
    gCatena.SafePrintf("No BME280 found: check wiring\n");
  }
}

bool setup_scales(void)
{
  bool res;
  res = true;

  if (config_data.debug_level > 0) {
    gCatena.SafePrintf("Setup Scales...\n");
  }

  // Enable Power
  digitalWrite(D10, HIGH);

  // Initialize library with data output pin, clock input pin and gain factor.
  // Channel selection is made by passing the appropriate gain:
  // - With a gain factor of 64 or 128, channel A is selected
  // - With a gain factor of 32, channel B is selected
  // By omitting the gain factor parameter, the library
  // default "128" (Channel A) is used here.
  LoadCell.begin(A1, A0);

  if (!(LoadCell.wait_ready_timeout(2000))) {
    gCatena.SafePrintf("Scale not ready after Init.\n");
    res = false;
  }

  if (config_data.debug_level > 0) {
    gCatena.SafePrintf("Setup Scale is complete\n");
  }

  return res;
}

void setup_flash(void)
{
  if (gFlash.begin(&gSPI2, Catena::PIN_SPI2_FLASH_SS)) {
    fFlash = true;
    gFlash.powerDown();
    if (config_data.debug_level > 0) {
      gCatena.SafePrintf("FLASH found, but power down\n");
    }
  }
  else {
    fFlash = false;
    gFlash.end();
    gSPI2.end();
    if (config_data.debug_level > 0) {
      gCatena.SafePrintf("No FLASH found: check hardware\n");
    }
  }
}

void setup_uplink(void)
{

  // Do an unjoin, so every reboot will trigger a join
  if (config_data.debug_level > 0) {
    gCatena.SafePrintf("Do an unjoin...\n");
  }
  LMIC_unjoin();

  /* trigger a join by sending the first packet */
  if (!(gCatena.GetOperatingFlags() & static_cast<uint32_t>(gCatena.OPERATING_FLAGS::fManufacturingTest))) {
    if (!gLoRaWAN.IsProvisioned())
      gCatena.SafePrintf("LoRaWAN not provisioned yet. Use the commands to set it up.\n");
    else {
      gLed.Set(LedPattern::Joining);

      /* trigger a join by sending the first packet */
      StartNewIteration();
    }
  }
}

// The Arduino loop routine -- in our case, we just drive the other loops.
// If we try to do too much, we can break the LMIC radio. So the work is
// done by outcalls scheduled from the LMIC os loop.
void loop()
{
  gCatena.poll();
}

void ClearLoraData(void)
{
  lora_data.version = LORA_DATA_VERSION;
  lora_data.vbat = 0;
  lora_data.temperature = 0;
  for (int i = 0; i < MAX_VALUES_TO_SEND; i++) {
    lora_data.humidity[i] = 0;
    lora_data.pressure[i] = 0;
    lora_data.weight[i] = 0;
    if (i < (MAX_VALUES_TO_SEND - 1)) {
      lora_data.temperature_change[i] = 0;
    }
  }

  lora_data_first.version = LORA_DATA_VERSION_FIRST_PACKAGE;
  lora_data_first.fw_version = fwVersion;
  lora_data_first.vbat = 0;
  lora_data_first.humidity = 0;
  lora_data_first.pressure = 0;
  lora_data_first.weight1 = 0;
  lora_data_first.weight2 = 0;
  lora_data_first.weight = 0;
  lora_data_first.temperature = 0;

  my_position = 0;

  // We initialize last_sensor_reading
  last_sensor_reading.vbat = 0;
  last_sensor_reading.weight1 = 0;
  last_sensor_reading.weight2 = 0;
  last_sensor_reading.weight = 0;
  last_sensor_reading.temperature = 0;
  last_sensor_reading.humidity = 0;
  last_sensor_reading.pressure = 0;
}

void ShowLORAData(bool firstTime)
{
  if (firstTime) {

    gCatena.SafePrintf("{\n");
    gCatena.SafePrintf("  \"version\": \"%d\",\n", lora_data_first.version);
    gCatena.SafePrintf("  \"fw_version\": \"%d\",\n", lora_data_first.fw_version);
    gCatena.SafePrintf("  \"vbat\": \"%u\",\n", lora_data_first.vbat);
    gCatena.SafePrintf("  \"humidity\": \"%u\",\n", lora_data_first.humidity);
    gCatena.SafePrintf("  \"pressure\": \"%u\",\n", lora_data_first.pressure);
    gCatena.SafePrintf("  \"weight1\": \"%ld\",\n", lora_data_first.weight1);
    gCatena.SafePrintf("  \"weight2\": \"%ld\",\n", lora_data_first.weight2);
    gCatena.SafePrintf("  \"weight\": \"%u\",\n", lora_data_first.weight);
    gCatena.SafePrintf("  \"temperature\": \"%u\",\n", lora_data_first.temperature);
    gCatena.SafePrintf("}\n");

  } else {

    gCatena.SafePrintf("{\n");
    gCatena.SafePrintf("  \"version\": \"%d\",\n", lora_data.version);
    gCatena.SafePrintf("  \"vbat\": \"%u\",\n", lora_data.vbat);
    gCatena.SafePrintf("  \"temperature\": \"%u\",\n", lora_data.temperature);
    gCatena.SafePrintf("  \"humidity\": [");
    for (int i = 0; i < MAX_VALUES_TO_SEND; i++) {
      gCatena.SafePrintf("%d", lora_data.humidity[i]);
      if (i < (MAX_VALUES_TO_SEND - 1)) {
        gCatena.SafePrintf(",");
      }
    }
    gCatena.SafePrintf("],\n");
    gCatena.SafePrintf("  \"pressure\": [");
    for (int i = 0; i < MAX_VALUES_TO_SEND; i++) {
      gCatena.SafePrintf("%d", lora_data.pressure[i]);
      if (i < (MAX_VALUES_TO_SEND - 1)) {
        gCatena.SafePrintf(",");
      }
    }
    gCatena.SafePrintf("],\n");
    gCatena.SafePrintf("  \"weight\": [");
    for (int i = 0; i < MAX_VALUES_TO_SEND; i++) {
      gCatena.SafePrintf("%ld", lora_data.weight[i]);
      if (i < (MAX_VALUES_TO_SEND - 1)) {
        gCatena.SafePrintf(",");
      }
    }
    gCatena.SafePrintf("],\n");
    gCatena.SafePrintf("  \"temperature_change\": [");
    for (int i = 0; i < MAX_VALUES_TO_SEND - 1; i++) {
      gCatena.SafePrintf("%d", lora_data.temperature_change[i]);
      if (i < (MAX_VALUES_TO_SEND - 2)) {
        gCatena.SafePrintf(",");
      }
    }
    gCatena.SafePrintf("]\n");
    gCatena.SafePrintf("}\n");

  }
}

uint8_t GetVBatValue(int millivolts)
{
  uint8_t res;
  if (millivolts <= 2510) {
    res = 0;

  } else if (millivolts >= 4295) {
    res = 255;

  }  else {
    res = (millivolts - 2510) / 7;
  }

  return res;
}

void DoDeepSleep()
{
  if (config_data.debug_level > 0) {
    gCatena.SafePrintf("Now going to deep sleep: %d\n", millis());
  }

  // Prepare Deep Sleep
  gLed.Set(LedPattern::Off);

  Serial.end();
  Wire.end();
  SPI.end();
  if (fFlash)
    gSPI2.end();

  // Now sleeping...
  gCatena.Sleep(CATCFG_T_INTERVAL);

  // Recover from wakeup...
  Serial.begin();
  Wire.begin();
  SPI.begin();
  if (fFlash)
    gSPI2.begin();
  if (config_data.debug_level > 0) {
    gCatena.SafePrintf("Done with deep sleep: %d\n", millis());
  }
}

void ReadSensors(SENSOR_data &sensor_data) {
  SENSOR_data res;
  int32_t weight_current32;

  // vBat
  res.vbat = (uint8_t)(gCatena.ReadVbat() * 1000.0f);
  if (config_data.debug_level > 0) {
    gCatena.SafePrintf("vBat:    %d mV\n", res.vbat);
  }

  // Read Scales
  if (setup_scales()) {
    if (config_data.debug_level > 0) {
      gCatena.SafePrintf("HX711 LoadCell is ready.\n");
    }
    LoadCell.set_gain(128);
    res.weight1 = (int32_t)LoadCell.read_average(5);
    if (config_data.debug_level > 0) {
      gCatena.SafePrintf("Load_cell 1 weight1_current: %ld\n", res.weight1);
    }
    LoadCell.set_gain(32);
    res.weight2 = (int32_t)LoadCell.read_average(5);
    if (config_data.debug_level > 0) {
      gCatena.SafePrintf("Load_cell 2 weight2_current: %ld\n", res.weight2);
    }
  }
  else {
    if (config_data.debug_level > 0) {
      gCatena.SafePrintf("HX711 LoadCell not ready.\n");
    }
  }

  // Disable Power
  digitalWrite(D10, LOW);

  // Gewicht berechnen
  weight_current32 = (int32_t)((((res.weight1 - config_data.cal_w1_0) / config_data.cal_w1_factor) + ((res.weight2 - config_data.cal_w2_0) / config_data.cal_w2_factor)) / 5.0);
  if (weight_current32 < 0) {
    weight_current32 = 0;
  } else if (weight_current32 > UINT16_MAX) {
    weight_current32 = UINT16_MAX;
  }
  res.weight = (uint16_t)weight_current32;

  if (fBme) {
    /* warm up the BME280 by discarding a measurement */
    (void)gBME280.readTemperature();

    Adafruit_BME280::Measurements m = gBME280.readTemperaturePressureHumidity();
    // temperature is 2 bytes from -0x80.00 to +0x7F.FF degrees C
    // pressure is 2 bytes, hPa * 10.
    // humidity is one byte, where 0 == 0/256 and 0xFF == 255/256.
    if (config_data.debug_level > 0) {
      gCatena.SafePrintf(
        "BME280:  T: %d P: %d RH: %d\n",
        (int)m.Temperature,
        (int)m.Pressure,
        (int)m.Humidity);
    }
    res.temperature = (int16_t)((m.Temperature) * 10);
    res.humidity = (uint8_t)m.Humidity;
    res.pressure = (uint8_t)((m.Pressure / 100) - PRESSURE_OFFSET);
    if (config_data.debug_level > 0) {
      gCatena.SafePrintf("pressure_current: %d\n", res.pressure);
    }
  }

  sensor_data = res;
}

void StartNewIteration() {
  // we increment the iteration counter
  iteration++;

  SENSOR_data current_sensor_reading;
  ReadSensors(current_sensor_reading);
  int16_t temp_change;

  // vBus
  float vBus = gCatena.ReadVbus();
  if (config_data.debug_level > 0) {
    gCatena.SafePrintf("vBus:    %d mV\n", (int)(vBus * 1000.0f));
  }
  fUsbPower = (vBus > 4.3) ? true : false;

  if (iteration == 1) {
    lora_data_first.vbat = current_sensor_reading.vbat;
    lora_data_first.weight1 = current_sensor_reading.weight1;
    lora_data_first.weight2 = current_sensor_reading.weight2;
    lora_data_first.weight = current_sensor_reading.weight;
    lora_data_first.temperature = current_sensor_reading.temperature;
    lora_data_first.humidity = current_sensor_reading.humidity;
    lora_data_first.pressure = current_sensor_reading.pressure;
  } else {
    lora_data.vbat = current_sensor_reading.vbat;
    lora_data.weight[my_position] = current_sensor_reading.weight;
    if (my_position == 0) {
      lora_data.temperature = current_sensor_reading.temperature;
    } else {
      temp_change = current_sensor_reading.temperature - last_sensor_reading.temperature;
      if (temp_change > 127) {
        temp_change = 127;
      }
      if (temp_change < -128) {
        temp_change = -128;
      }
      lora_data.temperature_change[my_position - 1] = (uint8_t)temp_change;
    }
    lora_data.humidity[my_position] = current_sensor_reading.humidity;
    lora_data.pressure[my_position] = current_sensor_reading.pressure;
  }

  if (my_position == 0) {
    timer_pos0 = millis();
  }

  if (config_data.debug_level > 0) {
    ShowLORAData(iteration == 1);
  }
  my_position++;

  // Should we send the Data?
  // we send data the first time the system is started, when the array is full
  // or when the weight has fallen more than threshold or the first measurement is
  // more than one hour old (which should not happen :-) )
  if ( (iteration == 1) || (my_position >= MAX_VALUES_TO_SEND) || ((last_sensor_reading.weight - current_sensor_reading.weight) > SEND_DIFF_THRESHOLD_5GRAMS) || ((millis() - timer_pos0) > 3600000)) {
    lora_data.offset_last_reading = (uint8_t)((millis() - timer_pos0) / 1000 / 60);
    if (config_data.debug_level > 0) {
      gCatena.SafePrintf("startSendingUplink(), my_position: %d\n",my_position);
    }
    startSendingUplink(iteration == 1);
    gLed.Set(LedPattern::TwoShort);

    // we allow 10 seconds for RX1 and RX2 to complete...
    uint32_t deepSleepDelay = 10;
    for (auto n = deepSleepDelay; n > 0; --n)
    {
      uint32_t tNow = millis();

      while (uint32_t(millis() - tNow) < 1000)
      {
        gCatena.poll();
        yield();
      }
    }
  }

  if (iteration > 1) {
    // we make the current sensor reading to the last one...
    last_sensor_reading = current_sensor_reading;
  }

  if (config_data.debug_level > 0) {
    gCatena.SafePrintf("now going to sleep for %d seconds...\n",CATCFG_T_INTERVAL);
    if (fUsbPower) {
      gCatena.SafePrintf("USB Power is on\n");
    } else {
      gCatena.SafePrintf("USB Power is off\n");
    }
    //Serial.flush();
  }
  gLed.Set(LedPattern::Sleeping);
  if (!fUsbPower) {
    DoDeepSleep();
    startNewIterationCb(&iterationJob);
  } else {
    gCatena.SafePrintf("os_setTimedCallback for startNewIterationCb in %d...\n",CATCFG_T_INTERVAL);
    os_setTimedCallback(
      &iterationJob,
      os_getTime() + sec2osticks(CATCFG_T_INTERVAL),
      startNewIterationCb);
  }
}

void startSendingUplink(bool firstTime)
{
  LedPattern savedLed = gLed.Set(LedPattern::Measuring);

  if (savedLed != LedPattern::Joining)
    gLed.Set(LedPattern::Sending);
  else
    gLed.Set(LedPattern::Joining);

  bool fConfirmed = false;
  if (gCatena.GetOperatingFlags() & (1 << 16)) {
    if (config_data.debug_level > 0) {
      gCatena.SafePrintf("requesting confirmed tx\n");
    }
    fConfirmed = true;
  }

  if (firstTime) {
    if (config_data.debug_level > 0) {
      gCatena.SafePrintf("SendBuffer firstTime\n");
    }
    gLoRaWAN.SendBuffer((uint8_t*)&lora_data_first, sizeof(LORA_data_first), sendBufferDoneCb, NULL, fConfirmed, kUplinkPort);
  } else {
    if (config_data.debug_level > 0) {
      gCatena.SafePrintf("SendBuffer not firstTime\n");
    }
    gLoRaWAN.SendBuffer((uint8_t*)&lora_data, sizeof(LORA_data), sendBufferDoneCb, NULL, fConfirmed, kUplinkPort);
  }
  ClearLoraData();
}

static void sendBufferDoneCb(
  void* pContext,
  bool fStatus)
{
  osjobcb_t pFn;

  gLed.Set(LedPattern::Settling);

  pFn = settleDoneCb;
  if (! fStatus)
  {
    if (!gLoRaWAN.IsProvisioned())
    {
      // we'll talk about it at the callback.
      pFn = txNotProvisionedCb;

      // but prevent join attempts now.
      gLoRaWAN.Shutdown();
    }
    else if (config_data.debug_level > 0) {
      gCatena.SafePrintf("send buffer failed\n");
    }
  }

  os_setTimedCallback(
    &sensorJob,
    os_getTime() + sec2osticks(CATCFG_T_SETTLE),
    pFn
  );
}

static void txNotProvisionedCb(
  osjob_t *pSendJob
)
{
  if (config_data.debug_level > 0) {
    gCatena.SafePrintf("LoRaWAN not provisioned yet. Use the commands to set it up.\n");
  }
  gLoRaWAN.Shutdown();
  gLed.Set(LedPattern::NotProvisioned);
}


static void settleDoneCb(
  osjob_t* pSendJob)
{
  if (config_data.debug_level > 0) {
    gCatena.SafePrintf("settleDoneCb\n");
  }

  if (config_data.debug_level > 2) {
    // Terry vv
    gCatena.SafePrintf("LMIC.rxDelay: %i\n", LMIC.rxDelay);
    gCatena.SafePrintf("LMIC.dn2Dr: %i\n", LMIC.dn2Dr);
    gCatena.SafePrintf("LMIC.dn2Freq: %i\n", LMIC.dn2Freq);
    gCatena.SafePrintf("LMIC.rx1DrOffset: %i\n", LMIC.rx1DrOffset);
    // Terry ^^
  }

  sleepDoneCb(pSendJob);
}

static void sleepDoneCb(osjob_t* pJob)
{
  gLed.Set(LedPattern::WarmingUp);

  os_setTimedCallback(
    &sensorJob,
    os_getTime() + sec2osticks(CATCFG_T_WARMUP),
    warmupDoneCb);
}

static void warmupDoneCb(osjob_t* pJob)
{
  gCatena.SafePrintf("warmupDoneCb\n");
}

static void startNewIterationCb(osjob_t* pJob)
{
  gCatena.SafePrintf("startNewIterationCb\n");
  StartNewIteration();
}

static void receiveMessage(void *pContext, uint8_t port, const uint8_t *pMessage, size_t nMessage)
{
  uint32_t gram_A;
  uint32_t gram_B;
  SENSOR_data temp_sensor_data;

  if (config_data.debug_level > 0) {
    gCatena.SafePrintf("receiveMessage was called!!!\n");
  }

  if (config_data.debug_level > 2) {
    // Terry vv
    if (port == 0)
    {
      gCatena.SafePrintf("MAC message:");
      for (unsigned i = 0; i < LMIC.dataBeg; ++i)
      {
        gCatena.SafePrintf(" %02x", LMIC.frame[i]);
      }
      return;
    }

    gCatena.SafePrintf("Port: %i\n", port);
    gCatena.SafePrintf("LMIC.rxDelay: %i\n", LMIC.rxDelay);
    gCatena.SafePrintf("LMIC.dn2Dr: %i\n", LMIC.dn2Dr);
    gCatena.SafePrintf("LMIC.dn2Freq: %i\n", LMIC.dn2Freq);
    gCatena.SafePrintf("LMIC.rx1DrOffset: %i\n", LMIC.rx1DrOffset);
    // Terry ^^
  }

  if (config_data.debug_level > 0) {
    gCatena.SafePrintf("message received port(%02x)/length(%x)\n",
                       port, nMessage
                      );
    // we print out the received message...
    gCatena.SafePrintf("Current LMIC.seqnoUp: %d\n", LMIC.seqnoUp);
    gCatena.SafePrintf("Received Data (Payload): \n");
    for (byte i = 0; i < nMessage; i++) {
      gCatena.SafePrintf("%02x", pMessage[i]);
    }
    gCatena.SafePrintf("\n");
  }

  if (LMIC.seqnoUp > 2) {
    if (config_data.debug_level > 0) {
      gCatena.SafePrintf("tare with downlink is only possible within first two uplink packets!\n");
      return;
    }

  }

  if (port == 1 && nMessage == 1) {
    if (pMessage[0] == 0) {
      if (config_data.debug_level > 0) {
        gCatena.SafePrintf("reset both scales to zero\n");
      }
      ReadSensors(temp_sensor_data);
      config_data.cal_w1_0 = temp_sensor_data.weight1;
      config_data.cal_w2_0 = temp_sensor_data.weight2;
      gCatena.getFram()->saveField(cFramStorage::kBme680Cal, (const uint8_t *)&config_data, sizeof(config_data));
    }
  }

  if (port == 1 && nMessage == 9) {
    if (pMessage[0] == 1) {
      gram_A = 0;
      gram_A += (long)pMessage[1] << 24;
      gram_A += (long)pMessage[2] << 16;
      gram_A += (long)pMessage[3] << 8;
      gram_A += (long)pMessage[4];

      gram_B = 0;
      gram_B += (long)pMessage[5] << 24;
      gram_B += (long)pMessage[6] << 16;
      gram_B += (long)pMessage[7] << 8;
      gram_B += (long)pMessage[8];

      if (config_data.debug_level > 0) {
        gCatena.SafePrintf("tare scales, A: %d, B: %d\n", gram_A, gram_B);
      }
      ReadSensors(temp_sensor_data);
      config_data.cal_w1_factor = (((float)temp_sensor_data.weight1 - config_data.cal_w1_0) / gram_A);
      config_data.cal_w2_factor = (((float)temp_sensor_data.weight2 - config_data.cal_w2_0) / gram_B);
      gCatena.getFram()->saveField(cFramStorage::kBme680Cal, (const uint8_t *)&config_data, sizeof(config_data));
    }
  }

}

/* process "application hello" -- args are ignored */
// argv[0] is "hello"
// argv[1..argc-1] are the (ignored) arguments
cCommandStream::CommandStatus cmdHello(cCommandStream *pThis, void *pContext, int argc, char **argv)
{
  pThis->printf("Hello, world!\n");

  return cCommandStream::CommandStatus::kSuccess;
}


cCommandStream::CommandStatus cmdGetCalibrationSettings(cCommandStream *pThis, void *pContext, int argc, char **argv)
{
  pThis->printf("{\n");
  pThis->printf("  \"cal_w1_0\": \"%d\",\n", config_data.cal_w1_0);
  pThis->printf("  \"cal_w2_0\": \"%d\",\n", config_data.cal_w2_0);
  pThis->printf("  \"cal_w1_factor\": \"%d.%03d\n", (int)config_data.cal_w1_factor, (int)abs(config_data.cal_w1_factor * 1000) % 1000);
  pThis->printf("  \"cal_w2_factor\": \"%d.%03d\n", (int)config_data.cal_w2_factor, (int)abs(config_data.cal_w2_factor * 1000) % 1000);
  pThis->printf("}\n");

  return cCommandStream::CommandStatus::kSuccess;
}

cCommandStream::CommandStatus cmdGetSensorReadings(cCommandStream *pThis, void *pContext, int argc, char **argv)
{
  SENSOR_data temp_sensor_data;

  ReadSensors(temp_sensor_data);
  pThis->printf("{\n");
  pThis->printf("  \"weight\": \"%d\",\n", temp_sensor_data.weight);
  pThis->printf("  \"weight1_raw\": \"%d\",\n", temp_sensor_data.weight1);
  pThis->printf("  \"weight2_raw\": \"%d\",\n", temp_sensor_data.weight2);
  pThis->printf("  \"temperature\": \"%d\",\n", temp_sensor_data.temperature);
  pThis->printf("  \"humidity\": \"%d\",\n", temp_sensor_data.humidity);
  pThis->printf("  \"pressure\": \"%d\",\n", temp_sensor_data.pressure);
  pThis->printf("  \"batt\": \"%d\",\n", temp_sensor_data.vbat);
  pThis->printf("}\n");

  return cCommandStream::CommandStatus::kSuccess;
}

cCommandStream::CommandStatus cmdGetScale1(cCommandStream *pThis, void *pContext, int argc, char **argv)
{
  pThis->printf("getscale1\n");

  return cCommandStream::CommandStatus::kSuccess;
}

cCommandStream::CommandStatus cmdGetScale2(cCommandStream *pThis, void *pContext, int argc, char **argv)
{
  pThis->printf("getscale2\n");

  return cCommandStream::CommandStatus::kSuccess;
}

cCommandStream::CommandStatus cmdCalibrateZeroScaleA(cCommandStream *pThis, void *pContext, int argc, char **argv)
{
  SENSOR_data temp_sensor_data;

  ReadSensors(temp_sensor_data);
  config_data.cal_w1_0 = temp_sensor_data.weight1;
  gCatena.getFram()->saveField(cFramStorage::kBme680Cal, (const uint8_t *)&config_data, sizeof(config_data));

  pThis->printf("{ \"msg\": \"calibrate_zero_scale_a was successful\" }\n");

  return cCommandStream::CommandStatus::kSuccess;
}

cCommandStream::CommandStatus cmdCalibrateZeroScaleB(cCommandStream *pThis, void *pContext, int argc, char **argv)
{
  SENSOR_data temp_sensor_data;

  ReadSensors(temp_sensor_data);
  config_data.cal_w2_0 = temp_sensor_data.weight2;
  gCatena.getFram()->saveField(cFramStorage::kBme680Cal, (const uint8_t *)&config_data, sizeof(config_data));

  pThis->printf("{ \"msg\": \"calibrate_zero_scale_b was successful\" }\n");

  return cCommandStream::CommandStatus::kSuccess;
}

cCommandStream::CommandStatus cmdCalibrateScaleA(cCommandStream *pThis, void *pContext, int argc, char **argv)
{
  SENSOR_data temp_sensor_data;

  ReadSensors(temp_sensor_data);
  String w1_gramm(argv[1]);
  config_data.cal_w1_factor = (((float)temp_sensor_data.weight1 - config_data.cal_w1_0) / w1_gramm.toFloat());

  gCatena.getFram()->saveField(cFramStorage::kBme680Cal, (const uint8_t *)&config_data, sizeof(config_data));

  gCatena.SafePrintf("temp_sensor_data.weight1: %ld\n", temp_sensor_data.weight1);
  gCatena.SafePrintf("config_data.cal_w1_0: %ld\n", config_data.cal_w1_0);
  gCatena.SafePrintf("w1_gramm: %s\n", w1_gramm);
  gCatena.SafePrintf("w1_gramm (float): %d\n", (int)w1_gramm.toFloat());
  gCatena.SafePrintf("config_data.cal_w1_factor: %d\n", (int)config_data.cal_w1_factor);

  pThis->printf("{ \"msg\": \"calibrate_scale_a was successful\" }\n");

  return cCommandStream::CommandStatus::kSuccess;
}

cCommandStream::CommandStatus cmdCalibrateScaleB(cCommandStream *pThis, void *pContext, int argc, char **argv)
{
  SENSOR_data temp_sensor_data;

  ReadSensors(temp_sensor_data);
  String w2_gramm(argv[1]);
  config_data.cal_w2_factor = (((float)temp_sensor_data.weight2 - config_data.cal_w2_0) / w2_gramm.toFloat());

  gCatena.getFram()->saveField(cFramStorage::kBme680Cal, (const uint8_t *)&config_data, sizeof(config_data));

  pThis->printf("{ \"msg\": \"calibrate_scale_b was successful\" }\n");

  return cCommandStream::CommandStatus::kSuccess;
}

cCommandStream::CommandStatus cmdSetDebugLevel(cCommandStream *pThis, void *pContext, int argc, char **argv)
{
  String s_debug_level(argv[1]);

  config_data.debug_level = s_debug_level.toInt();
  gCatena.getFram()->saveField(cFramStorage::kBme680Cal, (const uint8_t *)&config_data, sizeof(config_data));

  pThis->printf("{ \"msg\": \"set_debug_level was successful\" }\n");

  return cCommandStream::CommandStatus::kSuccess;
}

cCommandStream::CommandStatus cmdGetDebugLevel(cCommandStream *pThis, void *pContext, int argc, char **argv)
{
  gCatena.getFram()->saveField(cFramStorage::kBme680Cal, (const uint8_t *)&config_data, sizeof(config_data));

  pThis->printf("{ \"msg\": \"debug_level is %d\" }\n", config_data.debug_level);

  return cCommandStream::CommandStatus::kSuccess;
}